[Homey Pro 2023/2026/mini] Informationen und Diskussionen zu neuen Firmware-Updates

[DirkG]

Den hatte ich gestern bereits neu gestartet und gerade eben erst nachgeschaut.
Aktuelle Betriebszeit 17 Stunden:

Trotzdem schließe ich nicht aus, dass mit der Zeit neue Unknown Nodes auftauchen werden. Schließlich ist das gestern vor dem Neustart ja passiert.

Es häufen sich übrigens auch Meldungen mit Zigbee als auch Z-Wave Problemen nach dem Firmwareupdate auf v13.2.0:
– Firmware 13.2 Zigbee issues
– Z Wave not working after updating to 13.2.0

Hier noch weitere Fehlermeldung aus dem Aqara Topic, zum Teil mit unterschiedlichen Geräten:

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

Since Homey v13.2.0 update got installed this morning my Aqara T2 dual relay’s which control my overhead lights in my office keep blinking off and then on without a real noticeable interval, but often enough that is annoying. I have the T2 configured as a ‘plugged in Lamp’ that switches the output 1 to send power to my skylights. The T2 is configured to reset to the previous state after a power break but that is not actually happening. In the homey log of the device the ‘blink’ is also not logge…

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

I am having the same issue, the Aqara T2 dual relay power cycling every 15-45 sec randomly, on either relay when they are turned on. I did the same test as you - turning on the relays then powering off Homey Pro seem to stop the power cycling, so the issue is definitely related to the new Homey update.

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

Since the homey update this morning, both of my T1 LED strips are not responding to anything at all

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

same here. Smart plugs not functioning. wall switch not responding most of the time. but also working on other moments. never had any problems with aqara smart plugs

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

Same problem here with my FP300’s (ZigBee). All of them were stuck in motion and/or presence detected. Tried rebooting everything, repairing the FP300’s with limited success. One of them is still stuck even after repeated repairing attempts. [Screenshot 2026-05-22 at 08.33.16]