Aqara & Xiaomi Smart home (Zigbee) This app adds support for the Smart Home devices made by Aqara & ! Xiaomi Smart Home Devices working on the Zigbee protocol. [large] Links: Aqara & Xiaomi-mi Zigbee app Athom apps Supported devices Please see the Aqara & Xiaomi-mi Zigbee app Athom apps in the…

Hello The Aqara vibration T1 sensor doesn’t get recognised. I see there is one model in the list of supported devices, but not T1. Homey adds it as a standard zigbee device. I wanted to measure vibration levels with it… (in a graph) Can this be done?

Hi. I have been using a T1 LED strip for a year without issues. I just installed a second one, and now both of them is failing all the time (after 6-24hr). (Zigbee, no hub). I have tried repairing them, and even resetting the Zigbee system. Restarted the app and the homey. They always come back onl…

Since Homey v13.2.0 update got installed this morning my Aqara T2 dual relay’s which control my overhead lights in my office keep blinking off and then on without a real noticeable interval, but often enough that is annoying. I have the T2 configured as a ‘plugged in Lamp’ that switches the output 1…

I am having the same issue, the Aqara T2 dual relay power cycling every 15-45 sec randomly, on either relay when they are turned on. I did the same test as you - turning on the relays then powering off Homey Pro seem to stop the power cycling, so the issue is definitely related to the new Homey upd…

Since the Homey firmware update last night (and my change logs flow didn’t detect an Aqara app update) most of my Aqara FP300’s are stuck with motion and presence sensors on. I have tried restarting the sensors. I have tried re-pairing the sensors. I have tried restarting the Aqara app on my Homey. …

My Aqara Zigbee devices haven’t recovered, most of my FP300 presence sensors are stuck with presence detected, so don’t trigger flows when I enter or leave a room. I have tried everything imaginable (resetting, repairing, rebooting sensors app and Homey Pro, reducing sensitivity etc etc). Devices an…

I have just noticed that most of the FP300’s batteries have plummeted in available charge since last night’s Homey firmware update. They’re all running in Zigbee mode, and were all 90% plus the last few days. Did this reinstatement of the Zigbee routes cause a hammering of Zigbee comms that could h…

same here. Smart plugs not functioning. wall switch not responding most of the time. but also working on other moments. never had any problems with aqara smart plugs

Device: Aqara Light Switch H2 EU, Zigbee model lumi.switch.agl009 Aqara Homey App version: 1.16.2 Setup: Zigbee, connected directly to Homey Pro (no additional hub), neutral wire wired Issue: Blue status LEDs on all switches blink rapidly in quick succession every ~30–60 seconds. Audible relay cl…

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

Apps

Paul_Christen May 21, 2026, 4:23pm 7143

Since the homey update this morning, both of my T1 LED strips are not responding to anything at all

[Homey Pro 2023/2026/mini] Informationen und Diskussionen zu neuen Firmware-Updates

Topic		Replies	Views
Mi Homey Apps app	335	24241	May 24, 2023
Produit Xiaomi compatibles Appareils app , zigbee , devices	57	7259	January 23, 2021
Aqara Water Leak Sensor not working Questions & Help	54	1407	May 22, 2025
Aqara sensors stopped working? Devices zigbee	171	20443	January 11, 2024
[APP][Pro] Xiaomi Mi Home App Apps app , homey-pro	1992	119367	May 24, 2026

[APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home

Related topics