After I rebooted my Homey to move it just a little bit, Zigbee has stopped working. When the device boots up, all the icons of Zigbee devices just spin loading. When going to add device, Zigbee just loads. Settings for Zwave works, but Zigbee times out. So Zigbee is like just disabled suddenly on H…

having some issues here with Zigbee as well. Having a Homey Pro for not even 4 months. Issues started with one Hue bulb and then a day later also with an IKEA bulb. did a restart of Homey and the apps concerning but that made it worse because i didn’t see the zigbee nodes anymore. Did a PTP for 10…

Are you sure the devices aren’t out of range? After a reboot it may take some time for devices to show up on the Zigbee page of the developer website.

re-adding a motion sensor is working after a few tries so i’m starting to think about wifi channel usage. Too bad that channel 11 cannot be altered because i have a neighbor who also has a Homey. What if every neighbor would have a Homey ? I am going to ask this question to Athome but maybe somebo…

well, i only have 4 of them and the one that was still working was two floors up so it cannot be something like that. I did a PTP for 10 minutes and then waited also at least 20 minutes. wondering if the wifi channel seems to be the issue here. The bulbs are 4 meters from the homey with a thin wall…

Have you tried replacing Homey’s power supply? When you’re using the original power supply, and Homey suddenly starts acting up, it may be a sign that the power supply is failing (for which it is very well known). A USB charger that can provide at least 2A and preferably from a reputable brand shoul…

[image] Erwin_De_Jong: well, i only have 4 of them and the one that was still working was two floors up so it cannot be something like that. It can always be something like that because different devices have different transmit/reception power or have some electrical, metal or other signal bl…

ok, no not yet. thanks for the tip. i had a week ago that Homey was present on the network but was not accessible to the app or web interfaces so will use another power adapter if i face issues again. The ikea bulb is no working again without re adding, only the Hue bulb is still not working and wi…

yes i know but the bulbs and a motion sensor were very near the Homey. also keeping the sensor next to the Homey did not work so i guess i can rule out it was something about the range. the bulbs have not been on every time since other people in the house use the switch but since this is happening …

[image] Erwin_De_Jong: the bulbs have not been on every time since other people in the house use the switch That is also asking for problems because they act and will be used as routers while switched on and other devices loose their route the moment they are switched off (or even when switch…

yes i know but only the bulbs had issues first. everything that is powered is a router, i know. that is not whats happening here. i will investigate more. I have also added the Philips Hue now again (could reset it wit only a dimmer switch) so have to see how it goes from now. i also changed my wi…

Zigbee stopped working/broken

Questions & Help

Rocodamelshekima December 15, 2020, 11:02am 41

There is!

Topic		Replies	Views
Zigbee fully down Questions & Help zigbee	30	5505	November 10, 2024
Zigbee issue with Homey Pro 2026 migrated from Homey Pro (Early 2023) using USB Restore Questions & Help bugreport	173	2913	April 13, 2026
Zigbee issue (5.0.0-rc47) Questions & Help zigbee	42	4710	January 14, 2021
Homey don't find zigbee units after last updated to version 10.0.6(09.02.2024) Questions & Help zigbee	108	3878	February 3, 2025
The mystery of Zigbee Questions & Help	28	1036	September 13, 2024

Zigbee stopped working/broken

Related topics