Currently I am running Domoticz and after losing all my Z-Wave devices once more, having to give the server a hard reset again, spending hours to get Google Home connected through Home Bridge etc I am basically fed up with it. Now I want something that just works. Before switching to Homey however,…

[20211005_145423] Didn’t actually expect BCC to follow through, but just received this new Homey Pro for only € 279,- Mistake from their side. Should be discounted from € 399,- to € 379,- but was € 279,- instead. I’m happy!

[image] Peter_Kawa: Greenwave 6 node power node. Powermeasurement is only available for the first socket, in the past is was available for all sockets, maybe if you can find/use an old version of the app, it could be used.

There’s 2 supported Tuya zigbee 3 and 4 socket powerstrips, but it also cannot switch individual sockets. No power measure option :see_no_evil:

[image] JPe4619: [image] Peter_Kawa: Greenwave 6 node power node. Powermeasurement is only available for the first socket, in the past is was available for all sockets, maybe if you can find/use an old version of the app, it could be used. That’s too bad. But still all six can be switc…

The flowcards only say “device turned on” and “device turned off” So unfortunately no switching of individual sockets.

Kudos to you Peter for taking the time for such helpful replies to Rudi’s post Rudi - if you get stuck implementing an integration on Homey you can always leave a minimal Domoticz install running and publish the info to MQTT and then read that into Homey, probably providing control back to Domoticz…

I’m running both Domoticz and Homey. Using Homey for communication with Google Home and zwave. For communication between Domoticz and Homey I use webhooks where needed. Running this combo for several years now.

[image] Rudi_Hendrix: . But still all six can be switched independently? Yes,The Greenwave sockets can be switched on/off independendly, the power measurement is only done on the first socket. Peter is talking about the Tuya powerstrips.

[image] JPe4619: Peter is talking about the Tuya powerstrips Nope, b/c Tuya doesn’t have power measurement as I mentioned. I don’t own a Greenwave, but I posted the available flow cards already. There’s no separate socket 1, 2, 3, 4, 5 & 6 flow card. Just “device on/off”. But maybe it’s not…

Every socket of the power brick will be their own “device” inside Homey, so I you’ll get 6 (maybe even 7 counting the zwave chip) different entities, which is why there is only on/off. But indeed they removed the power reading from each separate socket, I believe there is only a aggregate one now, …

[image] Peter_Kawa: I don’t own a Greenwave, I do have 2 of them, using them every day, so trust my comments.

Switching from Domoticz to Homey

Questions & Help

Dijker October 30, 2025, 6:38pm 30

For those interested, there’s a new developer release.
Therefore, this old topic has been archived.

[APP][Pro] Domoticz - Control at your finger tips

Topic		Replies	Views
[APP][Pro] Domoticz - Control at your finger tips Apps app , domoticz , homey-pro	124	11355	January 14, 2026
Homey integratie met Domoticz Vragen & hulp z-wave	43	8696	October 30, 2025
Entscheidungshilfe Homey Pro Fragen & Hilfe	25	2081	October 21, 2020
Homey stand van zaken? 🇳🇱 Nederlands (Dutch)	67	9774	April 21, 2022
A Story of embracing Homey with over 60 devices Devices app , zigbee , homey-pro , home-assistant	3	898	January 28, 2025

Switching from Domoticz to Homey

Related topics