since today my neo cool cam v1 is not updating the lux as quick as it should be. i reset the sensor, removed and add it again. with no luck. what am I doing wrong. can you help [IMG_FA30E9A30B25-1]

What does “is not updating the lux as quick as it should be” mean? How did you checked it? What are your requirements? What should happen? Have checked the lux curve in Insights? Is the battery still ok? With the parameter “Lichtsterkte rapportage drempel (lux) = 5” a relatively low value is alrea…

What I mean with that is when I put my hand in front of the sensor its not updating the lux. The value will be set for 1 hour and then It will get the new value. My fibaro sensor does not have this. What you said about the z-wave connection was a possibility but its has been 17 hours now. So should…

[image] DirkG: With the parameter “Lichtsterkte rapportage drempel (lux) = 5” a relatively low value is already set. Theoretically, you could still set this value to That’s what i did

I suppose so, but you can’t really know for sure, because the network is constantly reorganizing itself. Have you ever tried the “test button” in Developer? But you have to wake up the sensor shortly before. I have 3 NEO v2 in use and they don’t cause any problems and react very quickly.

You have this one ? https://www.robbshop.nl/bewegingssensor-z-wave-plus-2-neo-coolcam I have the v1. Its suddenly a problem. Last week everything was working fine. The v2 is not working. For that i need to install the app from the community store Wake up is pressing the button 3 times right ?

Did u try to move the sensor next to Homey to see if that works? And what did the multimeter say when u measured the battery (“I did put in a new battery” is the wrong answer in this case!) ?

[image] Dave_Meijer1: You have this one ? Yeah, these work really well. I replaced Fibaro MotionSensors with these because the motion detection always got stuck with the Fibaros. [image] Dave_Meijer1: The v2 is not working. For that i need to install the app from the community store Y…

[image] DirkG: They don’t work with the official app at the moment, that’s correct. And even that is old news hehe.

Great. :+1:t4: But nobody could tell me the differences…

Lux settings neo coolcam v1

Devices

Rocodamelshekima July 9, 2020, 3:43pm 9

And even that is old news hehe.

Topic		Replies	Views
Neo Coolcam PIR V2 lux update Questions & Help	21	1440	April 4, 2021
Neo coolcam PIR independent lux measurement Questions & Help	4	854	November 25, 2020
Lux sensor with continuous reporting Devices	61	10919	January 9, 2021
Hue motion sensor - no lux value Devices zigbee	13	3863	October 28, 2019
NEO Coolcam Pir v2 not updating status Questions & Help	48	5503	April 6, 2020

Lux settings neo coolcam v1

Related topics