I’m getting fed up with Homey/Aqara- Zigbee… I thought ( a couple of years ago) that Zigbee would become the new standard. So now I have 16 Aqara door/windows sensors, 5 Aqara motion sensors and 8 Aqara temp/ humid sensors. Plus some 25+ Robbshobb Aqara light switches and a couple of Tradfri light…

And how is that sonoff Zigbee controller hooked up to Homey? You can still control your zigbee devices in a flow?

[Screenshot 2023-10-09 183048] As I said, I don’t have many Zigbee devices, just an Aqara Cube and Door/Window Sensor :smirk:. The (yellow 1) Sonoff dongle was added as a regular Zigbee device to Homey, I first flashed the firmware to ‘router’ mode. I see now that Homey has categorized it as a Wa…

You’re very welcome. [image] Menne_Talsma: First thing to do is to lose the Ikea devices, Just remove them from your zigbee mesh, you still have lights for the time being? [image] Menne_Talsma: You stated: Pro 2019 + Aqara + Ikea Tradfri Lights = :no_entry:, but I upgraded to Pro2023, I…

[image] Peter_Kawa: Aqara by itself is/seems to be a PITA on the Pro 23 Actually it was very bad in my case…after I did maintenance (when Athom releases firmware stating they were fixing some pairing issues on migrated Homeys), it works quite well and without issues. Unfortunately I have ask…

[image] Peter_Kawa: I don’t understand this logic. Prior to the actual reset of your zigbee network, you’ll have to be sure to have your 2.4GHz wifi on a (quiet as possible) fixed channel. When resetting zigbee, Homey then tries to find a quiet channel, and changes the zigbee channel if needed. …

@Peter_Kawa Well disabling Ikea did NOT do the trick here… Yesterday I simply deletet the Ikea-app from my Homey2023, and by doeing so deleting all my Ikeay appliances. After that I repaired all the Aqarara door and motion sensors (11 of them in total). Unfortunately… by the end of the day mor…

Not sure if deleting an app, removes it’s devices completely the from zigbee mesh. Did you test cutting the Ikea lights from mains also? [image] Menne_Talsma: if it makes any difference that I chose to ‘repair’ the existing sensors, rather then delete- and reinstall them Re-pair or re-add s…

In the ever-evolving landscape of smart home technology, finding the right balance between innovation and stability can be a daunting task. For many enthusiasts, Zigbee technology appeared to be the beacon of hope, promising seamless connectivity and a future-proof smart home experience. However, fr…

I found another solution which solved it (for now) and is well within my capabilities. ('Cus as I said before: Tthe Sonoff USB stick solution (which apparently means setting up an MQTTBroker/sever-thingy…) That’s WAY out of my league… My Solution: I had already Set-up My Old HP2019 as a satellite…

This is too much. I do not use Homey ZigBee but used to control three Hue bridges with the native hue app which also has known issues (slow sensor response time) and Athom promised to fix those long ago. I hated having to install HA on a RPi, but with the HA Community app it gave me better (lightni…

Aqara Zigbee sensors

Questions & Help

Rrrr January 15, 2024, 1:43pm 22

The Homey Matter implementation seems getting better and better.
My Home Assistant is now switched off.
I switched today but do not have the Aqara, but my Hue motion sensors are finally very fast.

Topic		Replies	Views
Aqara sensors stopped working? Devices zigbee	171	20423	January 11, 2024
Sensors stop working Questions & Help	45	709	January 8, 2025
Aqara Water Leak Sensor not working Questions & Help	54	1404	May 22, 2025
Aqara Door/Window sensors stop responding after 1-2 hours with HP2023 Devices zigbee , homey-pro	86	3963	September 28, 2025
Homey Pro 2023 Zigbee Issues Questions & Help homey-pro	94	5632	September 12, 2024

Aqara Zigbee sensors

Related topics