I confirm, it does work with that one, just checked
Good evening
This App is able to work with the sensors:
- WANFEI Flower Care Soil Tester
- B BestCon 4
Thank you
Hi, I’ve installed this app on a HP23,
As part of that I added a new device (straight from the box) as well as re-added an existing device from my current homey.
The existing device continues to be updated in the old homey and has not updated at all on the new homey since it was added (perhaps to be expected)
But also the brand new device added fine to the HP23, but has not updated its values since it’s i initial pairing.
Is this something that your aware of, or do you think is an isolated case?
92785c86-fe12-4889-9dea-57ab1ede454c
Dunno if this helps, Jamie, but here’s a similar post about migrated (to Homey 23) unkown BLE devices:
Adding a sensor to hp2023 does not work. I can add the sensor in the mi flora app. I removed the sensor in the app and removed the battery to reboot the sensor. Any tips
EDIT: Maybe this fw update works for you @wesley_w @Jamie
Seems you are not alone, definitely report Ble issue to Athom I would say.
With the RC56 its working for me
Try again and again. the discover is quite messy still.
I replaced the Battery after that it came alive.
Tried 8 times 9th time was the Lucky one.
Pairing is still a pain (but eventually works), but yes the latest firmware seems to have fixed the problem
I am actually looking to buy more of these sensors but they seem hard to find? Anyone received any recently?
If you still have some issues on HP2023, then test latest v10.0.0-rc.66
Bluetooth LE
- Changed the discovery interval from 10s to 5s.*
- Improved performance when scanning for Bluetooth LE devices.*
Ook nog goedkoper en in nederland👍🏻
@Glenn_Seegers Bought 2 sensors here a few months ago. 1 worked first try and the other tried several times to connect but could not connect. Email sent. Defective sensor sent to the seller and a new one in the mailbox after a few days. And it did worked first try. So ordering in the Netherlands can be easy. Although it will also work out through Ali. So if a sensor does not work, it may also be defective. Although we don’t assume that.
Got the 0 measurements back on the flora max with the new update
@Koktail Since the new update, my Mi flora sensors doesn’t report any more. when I pull the battery it reports 1 times and after that not anymore.