When can we hope for a Zaptec charger app for Homey? Anyone else waiting?

Is there a plan, or possibility, to add some data of the Sense module and/or Xemex P1MB-module? I have this combination of modules installed for load balancing. And they use my one and only P1-port and since installation of my zaptec then I can’t use my old P1-reader by Homewizard anymore. If my Z…

Hi Bastiaan, My main issue is that I don’t have any Sense module to develop against. So I can only develop by “guessing” and get someone to verify it. However, I’m currently quite short on time. Something that would speed things up would be if you dared to share your credentials with me so that I …

@pwad , any interest of implementing this? If the answear is “NO”, i accept it of course. The reason of the question is that Zaptec do have a aggressive temperature algorithm, so it would be very interesting and useful to se the internal temperatur/charging current in “homey insight”. Kind Regards …

Thanks @pwad I’m not a fan of sharing my credentials. I’ll ask a technical friend with this, to share a dump.

Hi, The temperature sensors you listed there are for the pro/home charger. I added Internal sensor 6 for those and picked sensor 5 (only available) for Go charger. Also humidity for both. They’re in the beta release for the app. Zaptec App for Homey | Homey Do test it out. Again, I have no charger…

Thanks! Works like a charm, except a factor issue. It reads 3.01 degrees in the Homey app, when it should be 30.14 degrees. The humidity is working as it should. ZaptecGo.

@pwad Would it be possible to add flow cards to enable/disable restricted access to the charger? This way you would avoid forgetting to authenticate charging when you get home and plug in the car, but the charger can remain restricted while no one is present (My charger is installed outside on a mou…

@pwad I still had no opportunity to get some help with creating the dump response. Will follow later

@Morten_Aggvin You mean like chargers with some kind of handshake protocol Tesla uses on their SuCs? And in Europe, Fastned implemented this as well.

I am having problems adding my Zaptec Go in homey. I login with username and password and do not get an error on those, but after a few seconds, I just get no new units found. Have tried to uninstall and install the app, and rebooted homey in between but still no luck. Any advice?

Zaptec app for Homey?

Questions & Help

philipostli December 31, 2024, 12:42am 154

We should use the app tread for new discussions. [App][Pro] Zaptec charging

Topic		Replies	Views
[App][Pro] Zaptec charging Apps app , homey-pro	107	3799	March 21, 2026
[APP][Pro] go-e Charger Apps app , homey-pro , sdk3	135	4213	April 12, 2026
Zaptec Wallbox steuern per API 🇩🇪 Deutsch (German)	2	1395	February 6, 2023
[APP][Pro] Peblar EV Charger - Plug in. Power up. Automate Apps app , community-app	90	1547	April 18, 2026
[APP][Pro] ChargeAmps Apps app , energy , homey-pro	205	4497	April 22, 2026

Zaptec app for Homey?

Related topics