Shelly UNI real time value

[Peter_Kawa]

@Mats_Borneling

why??

Why is a banana yellow.
When your only goal is to find out about the why, I’d like to advice again, to post your issue in the Shelly app topic, so the dev gets notified as well, next to other shelly users:

@Peter_Kawa

If you think this is a Shelly thing, use the official Shelly app topic please, instead of … .

or

Do you want to solve it?

We are trying let you read this piece of FAQ below. Did you read it, or didn’t you read it, you’re so unclear to me…
Did you follow the steps mentioned, and does it change the interval of 70 seconds?

@Phuturist

4. Homey Pro: Delayed status updates for Plus/Pro devices or no updates at all for Plus/Pro battery powered devices

If you experience delayed devices status updates for Plus/Pro devices (or no updates for battery powered devices at all) it’s most likely caused by incorrect configuration of the outbound websocket. Homey opens a websocket server for Plus/Pro device and during pairing configures the Shelly Plus/Pro device to report status updates to this websocket server. Sometimes this configuration fails or is incorrect (for instance when Homey is not assigned a static IP address) causing status updates to fallback on the slower polling method. To fix this:

1. Open the webinterface of your Shelly by entering it’s IP address in the browser.
2. Go to Settings > Outbound websocket.
3. Make sure the option is enabled and pointing to your Homey IP with port 6113. The address should look similar to ws://192.168.0.2:6113/ but with the IP address of your Homey. For connection type it should be set to TLS no validation.
4. If this configuration is missing either re-pair the device or add it manually using these instructions.

“delayed devices status updates” also include temperature updates