App page: https://homey.app/en-us/app/com.philio/Philio/
Hi everyone, I’m new to the forum and migrating a fairly large Devolo setup to Homey Pro (2026) after Devolo’s shutdown. I’m sharing my findings to help others in the same boat and to request driver fingerprint additions, so these devices work as intended.
Context
- Controller: Homey Pro (2026), Software 12.10.0
- Migrating from Devolo Home Control
- These Devolo‑badged Philio devices pair as “Unknown Z‑Wave Device” (generic tile only)
- Likely cause: Devolo-badged variants report Manufacturer ID 373 (0x0175), which current Philio drivers don’t match.
Devices and fingerprints
- Devolo Water/Flood Sensor MT 2756 (Philio PAT02-A)
· Manufacturer/Product/Type: 0x0175 / 0x0002 / 0x0021 (373 / 2 / 33)
· FW: 0x0221 (545) — App 1.11/1.10 — HW 1
· Expected: alarm_water, alarm_tamper, measure_battery
- Devolo Humidity Sensor MT 2755 (Philio PAT02-B)
· 0x0175 / 0x0002 / 0x0020 (373 / 2 / 32)
· FW: 0x0220 (544) — App 1.14/1.12 — HW 1
· Expected: measure_humidity (+ temp if supported), alarm_tamper, measure_battery
- Devolo Siren MT 2758 (Philio PSE02)
· 0x0175 / 0x0004 / 0x000A (373 / 4 / 10)
· FW: 0x040A (1034) — App 1.13/1.11 — HW 1
· Expected: onoff (siren), optional tone selection
Notes
- Qty: MT2756 x3, MT2755 x4, MT2758 x3
- All include non-secure; battery devices with 86400s wakeup; siren is mains
- Installed Philio app; still pairs as generic
- Happy to provide diagnostics and test a build
Request Please add fingerprints for Manufacturer ID 373 (Devolo-badged Philio variants) to map to the correct drivers.
