Might be off-topic, but on the Homey website at the Homey Pro page ( https://homey.app/nl-nl/homey-pro/ ), in the video you see a shot that disappears very quickly. If you open the video in a separate tab and disable the loop, it shows an BCM54213PE. I’ve looked up that number and it’s an Ethernet con…

Yeah, you’re right, here’s an enhanced photo: [image] But if you search around for photos of the CM4, you’ll find lots of different RAM chips, so it could be that one vendor is using proper QR codes on their chips.

A user on Tweakers.net is mentioning in the comments that Athom is offering a trade-in program for current HP23 users. Is that true, @Doekse ?

A few people (myself included), has already upgraded to a CM4 with more RAM and storage (most of us probably got the CM4 with 8 GB RAM and 32 GB flash), but the Homey software doesn’t seem to actually use it. It limits itself to what the original hardware had. Will there be any way of making our up…

[image] robertklep: The main issue is running Zigbee and Thread on the same chip at the same time. In any way; Homey is underperforming at this point.

I know understand the secrecy…. :blush: [image] trophy The Homey Community Awards Announcements It has arrived… [IMG_6004] Thanks again for this Special Edition Homey Pro! As I understand, it is even the updated 2026 model with double the RAM. Nice +1. The…

So now we at least have some photos of the PCB in the new Homey Pro. I will try to enhance it with AI, but don’t know if that will work. [image] (from the intro post of the Community Awards) The PCB looks mostly blank, and the rest is covered under the heatsink. So there will likely not be much …

[image] mroek: but the Homey software doesn’t seem to actually use it. It limits itself to what the original hardware had. With the RAM as well? Or only the storage? I think the firmware is shipped as an 8GB disk image, so after installing it you would have to adjust the partitions and resize…

[image] Henk_Renting: A user on Tweakers.net is mentioning a trade-in program for current HP23 users. Is that true, Haha, that would be nice, since I got mine on October 31, just too late for the 1 month return period of the seller :sob:. That said… [image] robertklep: The main issue i…

The one you see in the picture is still very much a Homey Pro (Early 2023) :wink:

No, there’s not much to see there :wink: Just some jellybean components: [F1E843FD-9D3E-4F0F-99D5-45B577E07784_1_102_o] That cap looks a bit suspicious… :thinking: [E48E45BC-0116-42F0-8668-429156749D60_1_201_a]

New Homey (Pro) model?

Off-Topic

Emile December 12, 2025, 9:56am 47

If you’d like to save all your device’s data forever, I’ve published a tutorial: How to log all device's measurements to TimescaleDB, and view them in Grafana.

Topic		Replies	Views
[Modding] Various Homey Pro (Early 2023) Modification suggestions Off-Topic homey-pro-2023 , modding	277	18262	June 14, 2026
Homey Pro (2026) 🇩🇪 Deutsch (German)	7	1516	December 10, 2025
Homey Pro (Early 2023) - Unboxing Off-Topic homey-pro	59	7779	February 24, 2023
Homey keynote - 12 October 2022 Ideas & Suggestions annoucement	117	5169	October 14, 2022
Homey Pro + Homey Mini: RAM and FLOW management Questions & Help homey-pro	10	516	December 11, 2025

New Homey (Pro) model?

Related topics