Last night my Homey Pro was updated to 12.13.0-rc.3 and since that everything seems slow. So, a Z-Wave or Zigbee motion sensor notices movement and only 30 seconds later the Zigbee lights switch on. Anyone else has this issue? Already restarted my Homey Pro

Don’t restart, pull the plug for 10 minutes instead. If that doesn’t work: stop using RC’s (which aren’t RC’s but beta’s, at best) :stuck_out_tongue_winking_eye:

Tried to pull the plug, but it didn’t work. Seems to be with only Zigbee lights. I notice that the motion sensor immediately notices activity; even the Zigbee ones. But then it takes a very long time for the lights to switch on. And it doesn’t seem like the app switches it on and only after a while…

https://support.homey.app/hc/en-us/articles/12199889665308-Enabling-experimental-updates-on-Homey-Pro

And a howto to actually revert: [image] [HowTo][Pro 2023/Mini] Revert from experimental to stable firmware Tutorials [As tested by @Henk_Renting and @Mickel_Luiten (Thx!)] Limitations Without an offline backup, you couldn’t & you can’t revert from the current …

[image] Rudi_Hendrix: Anyone else has this issue? Nope, I don’t. Have you tried to analyze your Homey, eg. sysinternals and looking for CPU/Mem usage ? How your ZWAVE/Zigbee looks like in development interface ? Do you get many Tx errors , some path/nodes unknown etc. ? Also, it could help …

1.7 of 2.0 GB memory used. There are so e Tx errors in the Zigbee overview. What is many? I didn’t check this before I had the issue. There are some unknown devices indeed. Cutting power to all Zigbee routers is pretty hard. If I reset my Zigbee network do I have to rebuild it again? Or will the…

[image] Rudi_Hendrix: There are some unknown devices indeed. This is with the new firmware and might be cosmetic issue only, at least for ZigBee [image] Rudi_Hendrix: Cutting power to all Zigbee routers What about fuse box? [image] Rudi_Hendrix: If I reset my Zigbee network do I …

According to Gemini I will have to re-pair all of my Zigbee devices then. So I am not going to hit the reset button. Just did re-added my Homey again, see if that helps, but it doesn’t. Edit: only just saw your reply. I guess the fuse box is the only option. Other than that. I can of course first…

Tried resetting some of them. So far no effect. Perhaps I just need to wait for the next stable update

A new RC update should fix zigbee, Rudi. [Screenshot_20260304_111914_Slack]

Homey very slow

Questions & Help

Peter_Kawa March 3, 2026, 6:17pm 5

And a howto to actually revert:

(I’d turn auto updates off!)

Topic		Replies	Views
Zigbee stop working since last update Questions & Help zigbee , homey-pro	35	425	April 18, 2026
Homey Pro 2023 firmware 10.3.0 - zigbee is broken Questions & Help homey-pro	164	6594	May 30, 2024
Homey Pro 2023 Zigbee Issues Questions & Help homey-pro	94	5626	September 12, 2024
Zigbee stuck in start up Questions & Help	49	327	April 17, 2026
Homey don't find zigbee units after last updated to version 10.0.6(09.02.2024) Questions & Help zigbee	108	3876	February 3, 2025

Homey very slow

Related topics