I had a flow in HP16 that turned on some lights at Sunset. I had this set at 120 minutes before Sunset. This doesn’t work on HP23. I changed the value to 60 minutes, still did not work. Changed to 0 and they now turn on at sunset. I haven’t tried any other values.

There’s no default log, I’d recommend the Simple Log app. [image] Peter_Bittner: TRANSMIT_COMPLETE_FAIL and TRANSMIT_COMPLETE_NO_ACK Yes, that’s not a flow problem, and probably a similar issue as discussed the topic [image] Peter_Bittner: Zwave issues with HP23 you mentioned

[image] Peter_Bittner: In this case I was thinking that maybe the issue was with the size or structure of my AF. As @Peter_Kawa und me already said, it’s not a problem of the AF, TRANSMIT_COMPLETE_FAIL and TRANSMIT_COMPLETE_NO_ACK are Z-Wave/HP23 problem. So I would suggest to contact Athom …

Here it is. I do have some Unknown Nodes but I can’t get rid of them. Would Remove Any Node work. I’ve never tried that as I’m not sure what it does. [ZWave 1] [ZWave 2] Here is a copy of something I wrote to Homey support which describes some weird behaviour I experienced. Basically support…

I would suggest try to delete the unknown devices first. Click on the 3 dots on the right side of the row of the Unknown Node and click on “Remove”. If “Remove” is greyed out, click first on “Test” (which will fail). After that “Remove” will be available. Click on “Remove”. Then do a PTP so that …

[image] [HOW TO] ptp Tutorials PTP [image] A lot of questions are asked about PTP. In this post a short explanation about PTP. What does PTP mean? PTP means Pull The plug. Make sure the power is off so not connected anymore. Pull the plug out of her! Now don’t put it …

Interesting. I’m assuming that PTP for 10 minutes puts the ZWave devices into some kind of state that when Homey comes back up it rebuilds the ZWave network. I finally got rid of my Unknown Nodes. I just had to persist and refresh the browser after each attempt. Even though I didn’t get a message…

I have installed Simple Log. It recommends also installing Better Logic. Is this recommended? I tried to install Better Logic but it keeps timing out after 10000ms.

Explanation why the failing sunset flow is an issue for me. Of course my exact example makes no sense, it is merely to demonstrate the bug. As explained I use state-based flows, meaning I have a flow responsible for the state of a device. For instance my exterior lights are handled by the flow belo…

[image] Peter_Bittner: It recommends also installing Better Logic. Is this recommended? No, Better Logic isn’t needed.

Homey Pro (Early 2023) - Sunset Flows

Questions & Help

Dijker May 14, 2023, 1:56pm 31

Topic		Replies	Views
Sonnenschutz funktioniert nicht mehr Flows (DE)	32	1553	July 4, 2021
Date & Time card for starting a flow 45 minutes before sunset stopped working Flows	7	417	November 24, 2025
[APP][Pro] Sun Events - Triggers you at certain positions of the sun Apps homey-pro	370	10709	April 28, 2026
Flow werkt niet, wat doe ik fout? Flows	12	1816	February 17, 2019
How Homey implements SUNSET and SUNRISE? Flows flow , homey-pro , advancedflow	21	575	February 23, 2026

Homey Pro (Early 2023) - Sunset Flows

Related topics