Everspring overall support topic

Hallo @ralfvd

I still clarify 2 questions in the German forum and would then test it. I inform you. Many thanks

Hi! @ralfvd

The Everspring an-179, has 2 binary inputs.
Is it possible to get the status of these out?

Thinking about using it for my garage door.
Use the relay as a toggle. And would like to get the status of the door back via a sensor.

So then i can use the an-179 to open/close the garagedoor and get the status.

Hi, thank you for making this version. I have a problem with AN-179. It is not possible to set toggle as switch type?
Thanks
Previn

1 Like

I installed the beta 2.09 now my device AN 181-2 is not responding to on/off and not reporting power usage.

Hi, add battery type for ST814
3 x AA

https://www.everspring.com/portfolio-item/st814-temperature-humidity-detector/

Hi Ralf I now have the same problem with a new motion sensor from Heimman. With that sensor I saw in the developers tool that a sabotage message was given in the event of movement. The SP103 also has a sabotage contact, only that does not appear in your app.? Could it be that in your app the movement is also seen as a sabotage.? Could it be that Homey has mixed up something in their zwave protocol?

AN181 is not working in v2.0.9.
Thanks!

Sadly no response from @ralfvd

I’ve made a chance for AN181 in v2.1.3 , it should be working now. If not, please submit a diagnostic report, so I can have a look at what is going wrong. Thanks for your patience!

Sorry for the delay, I"ve made a change for AN181 so if you update to 2.1.4 , it should work now. If not, please submit a diagnostics report, so I can have a look.

I am still working on the sabotage alarm. When I first included it (in one of the first Everspring versions), it was not working reliable. That was caused by a weird way of how the Everspring SP103 device works.

I am now giving it a second try, but don’t have the device myself, so I am relying on the community for feedback.

1 Like

I will happy to test is I have 2 non working at this moment

This app sadly does not work on v5

I used it with 3x AN158, after i got the v5 update today my 3 AN158 devices where completely gone from Homey, as well the app.
All the flows where the devices where used where of cource broken.

I found the beta version, installed it but sadky i cannot add the an 158 devices anymore.
When i add it, it is detected by homey and when i finish the adding process homey ends with a message that the device cannot be added and that was it…

I removed the devices again using settings and remove zwave device (following remove instructions) which Homey confirms it is done.
The tried to add it again but no success, adding the AN158 is simply impossible.

Hi @B3rt , developer here: sorry to hear you are having difficulties. Good that you found the Beta app, as Athom is now upgrading to 5.0 automatically, I’ve submitted this version for the non-Beta version. Hopefully it will be available soon.

I am not sure why your devices were not visible anymore after updating. But you should be able to re-install them.

Can you submit a diagnostics report via the app settings? Maybe then I can see what is happening in your case.

Thanks!

@ralfvd can you add support for the SP815 pir Unit ?
I see the SP814 and SP816 already.

Andrew

1 Like

@ralfvd ST814 is not updating the temperature or humidity. Only when i manual wakeup the ST814, the values are updating in Homey. I’m using Homey v5 and Everspring v2.1.5 (experimental)

Hi @ralfvd
Is there any news for non-beta version in appstore? For now it is not even searchable and you have to know url to test-version.
Everspring is essential for me before upgrading to v5.

And now it is on appstore :slight_smile:

Hi Morgan,

At first, Homey rerouted the SDK3 app (test) to non-test users on Homey v5 . The old one was available for users on Homey v4 . Apparently, they now made the change to only offer the SDK3 version, but didn’t reroute users anymore.

So that’s now fixed: SDK3 is the only available app.

Let me know if you run into any issues!

Thanks,

Ralf

1 Like

Gone 5.0.2 now. Everspring SDK3 work as a charm!