Purpose The difference of this app and the already existing solar panels app is that this app reads the data directly from the inverter. The solaredge api and others are mostly limited to 300 calls/ day, so you get only updates every 10-15 minutes. The modbus app receives data every few seconds. …

mostly you get some ip from dhcp but check home assistant docs modbus id 1 is mostly the master , are you using s-dongle?

No, should be the stable one, is that the reason I don’t see them yet? If I add /test in the app store I get a newer version than the one I have installed.

yeah do the test 1, I added it last weekend.

i have a huawei sun2000 system with battery. i would like to be notified when the battery is at 100% and i am feeding voltage into the grid. in the overview there is the status of the battery. in the flows there is no ‘if’ field for the battery charge in per cent, but only ‘if it goes higher’. the …

This is NEVER going to work: [image] as stated here: [image] [FAQ][Advanced Flow] Infinite canvas. Infinite creativity TIPs: Mistakes: One of the first Mistakes I already created an example for was posted within the first evening as “Example” on Facebook :wink: Two triggers to start an A…

ok. i understand that. but it doesnt solve my problem. but there is no ‘and’ condition in the solaredge app. and i want to check 2 conditions. :confused:

When … Active Power … AND… use logic card with Token Greater than Value THEN… etc.

You can make comparisons as much as you like doing it step by step. If you need a query on a value, this value can be a value or variable with value you set… Another thing is your original question, [when the battery is at 100%] and [battery charge] are 2 different things. You should either check …

Hi Phil_Bro, Wondering if it is possible to match the battery discharge (growatt 20KW Battery) with the used load for example when (no) solar is precent in the evening. I dont have a growatt meter, (already had a solardedge meter for the solar inverter) Thanks, Jan

[APP][Pro] SolarEdge + Growatt TCP modbus

Apps

Dijker February 16, 2025, 12:38pm 1317

This is NEVER going to work:

as stated here:

Topic		Replies	Views
[APP][Pro&Cloud][OFFICIAL] SolarEdge - Powering People’s Lives Around the World Apps app , official , homey-pro , homey-cloud	70	805	October 25, 2026
[APP][Pro] SMA Energy - My home. My energy. Our climate Apps app , homey-pro , pv-solar	553	33097	October 19, 2026
[APP][Pro] Modbus - Connect every Modbus devices Apps app , homey-pro , advancedflow	597	21134	October 7, 2026
[APP][Pro] Solis Cloud Inverter - Receive realtime data from your Solis Inverter Apps app , homey-pro , pv-solar	243	9146	September 1, 2026
[APP][Pro] Huawei Solar - Smart energy for a better life Apps	325	20326	January 24, 2026

[APP][Pro] SolarEdge + Growatt TCP modbus

Related topics