Monitor SMA solar devices with Homey App Store Page: SMA Energy | Homey Description Monitor and automate your SMA solar inverters, batteries and Sunny Home Manager from Homey. Everything runs locally: inverters and batteries over Modbus TCP, the Home Manager / Energy Meter over Speedwire multicast.…

Solved with update v2.3.4 Thanks Richard!

I have a issue that my solar inverter SUNNY BOY 4.0 and my SMA Wallbox EV Charger 7.4 won’t be identified? But the SHM2.0 ist identified without problems. Modbus is activated and also Port 502 selected Did someone having some ideas?

[image] Florian_Hutter: SMA Wallbox EV Charger No support added as of yet for it. Maybe a good project to try and add that. Will need one or two guinea pigs for trying this out given that I don’t own one myself. Ideally, someone that is able to install the app via CLI so we more easily can ca…

I don‘t know what is going wrong with SB 4.0. Autoidentify dont works. After adding IP manual the device Name appears, which can be selected. The dialog has only one button with close. At the device overview only power drawn shows data. Adding just work when using „sunny Boy storage“ Not inverter …

CLI at homey? Never done but I m having some experience with linux bash ssh a.s.o

21.12.21: „Could you please add the manual ip address field into the “energy meter” device? because in different vlans there is no chance to find the device anymore :wink:“ Same problem here. Is it possible to add manual up Adresse for energy meter? Thank you!

@Thomas_W this will not work because it is by design by SMA to connect the sunny home manager (2) via multicast

I’ve got the same problem Not able the add the device with the SMA inverter option Same scenario as shown in you printscreen A device is added when I do the same using the add sunny boy storage option, but I don’t get any readings on that device [image]

Sunny Boy storage should only be used for hybrid inverters with battery option/connected. For plain solar inverters you need to use the inverter device type. As per instructions above enable modbus, it is disabled by default. If auto discovery doesn’t work then your network doesn’t allow UDP mul…

[APP][Pro] SMA Energy - My home. My energy. Our climate

Apps

Richard_B February 15, 2022, 10:15pm 236

This guide is pretty good for understanding how to install an app via CLI - feels like we need it for the SB inverter issue, since I can’t see anything obviously wrong, it should be supported.

Topic		Replies	Views
[APP][Pro] Solar Panels - Let the sun power your home Apps homey-pro , pv-solar	422	26322	June 10, 2026
[APP][Pro] SolarEdge + Growatt TCP modbus Apps app , pv-solar	1886	61951	October 29, 2026
[App][Obsolete]Sofar / Solarman Apps	271	9224	November 4, 2024
[APP][Pro] Solis Cloud Inverter - Receive realtime data from your Solis Inverter Apps app , homey-pro , pv-solar	243	9162	September 1, 2026
[APP][Pro] Elekeeper / SAJ eSolar Inverters Apps app	68	1102	October 24, 2026

[APP][Pro] SMA Energy - My home. My energy. Our climate

Related topics