[APP][Pro] Powerview- Luxaflex & Hunter Douglas

Apps
, , , ,
282

Thanks for clarifying to way the “separate control” option should work. Unfortunately, it looks like it does not work correctly (at least for horizontal blinds), because if I set it to “yes” for “Werkkamer Links” and to “no” for “Werkkamer Rechts”, with pos1 and pos2 all on 100%:

  1. Saying “Ok Google, Close Werkkamer to 80%” will first rotate both to 0% (standard behavior, also with the remote control), move both down to 80% and then rotate both back to 100% (which it shouldn’t for “Werkkamer Rechts”). In the Homey app, pos2 for “Werkkamer Links” is on 100% (correct), but pos2 for “Werkkamer Links” is on 0% (so the logical state 0% is correct, but the physical state 100% is not);
  2. Saying “Ok Google, Rotate Werkkamer 50%” will rotate “Werkkamer Rechts” to 50% (also in the Homey app), but “Werkkamer Links” will not move (as it is already on 100%);
  3. Moving pos2 of “Werkkamer Links” manually in the Homey app to about 50% (using the slider) will rotate “Werkkamer Links” to about 50%;
  4. Saying “Ok Google, Open Werkkamer” will move both up, but when fully closed, they lower a little and pos2 of “Werkkamer Links” is again on about 50% (correct) but pos2 of “Werkkamer Rechts” is on 0% (should be 100%). When I use the remote control, the blinds are closed correctly (and stay closed).

This also happens with “Werkkamer Rechts” if I give the voice commands only for “Werkkamer Rechts” (and not for the whole room). So it seems, an extra command IS given after closing and opening to rotate “Werkkamer Rechts” physically, which shouldn’t happen as “separate control” is set to “no”. And after opening, pos2 should be on 100% instead of 0%. I hope you can fix this, because the wife really hates the blinds not being folded up totally (and me too) :wink:

By the way, I have created a thread for the voice commands. Can you please mention it in your FAQ? Google Assistant voice commands for window coverings

Rotating the horizontal blinds to a specific position or in the other direction and controlling the top bar of the TopDown-BottomUp shades still does not work. For the TDBU shades, I have set the second motor to “Secondary rail” instead of “Vane Tilt”. Is that correct? I also tried “Vane Tilt”, but that does not seem to make a big difference.