Version 4.3.1 has some improvements :
- multi locations on thermostat devices.
- multi location for quik actions.
- polling from 3 minutes to 60sec.
- SDK3
For multilocations you can ether do 2 things.
- log in to Home | Total Connect Comfort International with you evohome credentials and add the location, pair your evohome controller with the mac en crc.
- Share a evohome account with your own evonhome account.
After that add the devices in homey, for the quickactions pair with the new added driver/device(quickaction)
Because of the wrong implementation of the auth authentication in version 3.1.3 polling time was set to 3 minutes, this is in version 4.0.0 fixed and now polling time for thermostats and quikactions is set back to 10 seconds.
Upgrade to Homey SDK3
BE AWARE if you upgrading from version 3.1.3. to version 4.x.x
** upgrade from version 3.1.2 or lower wil fail, so first upgrade to 3.1.3 then upgrade to 4.0.0 **
- The current thermostat devices will be preserved!
- Some flows will be broken and are removed or moved to the device.
- Some useless tokens are removed
Trigger / token : Any changing temperature is removed. Homey’s device driven architecture makes this flow useless,
Use the device flow trigger and tokens.
Trigger . token : Mode changed not via Homey is removed. Becasue of the multilocation implementation, there now way on this card ti tell from which location the quickaction is triggered.
Use the device flow trigger and tokens.
Actioncard : Set QuickAction is moved to the quikaction device card.
Actioncard : Set Temporary QuickAction is removed. This actioncard was on timebased(hour) but in evhomepanel most quickactions is only daily basis (expect the eco/boost mode)
Actioncard : Set QuickAction manual entry is removed.
Becasue of the multilocation implementation, there now way on this card ti tell from which location the quickaction is triggered.
Use the device flow triggers and tokens.
Actioncard : Cancel adjustments in all zones is removed. . Becasue of the multilocation implementation, on all locations the temperature cancel will fire.
User the cancel temperatur adjustment card on the device.
General setting for username and password is removed. Just enter your credentials during pairing,. Or use the repair on one of the device if you e.g. change your evohome credentials
