Homey Pro 2023 - Homematic Taster (HmIP-WRC6) löst keine Flows aus

🇩🇪 Deutsch (German) Fragen & Hilfe
10

Wenn alles bis auf die Taster über den Homey geht, dann liegt es nicht an der Anbindung.
Falls das so ist, dann mach mal noch folgendes:

homematic.keypress events for Homematic IP devices

To get the homematic.keypress event for some Homematic IP devices like WRC2 / WRC6 (wall switch) or SPDR (passage sensor) or the KRC4 (key ring remote control) you have to temporary create an empty program for each channel in the CCU:

  1. In the menu of your CCU’s admin panel go to Programs and connections > Programs & CCU connection
  2. Go to New in the footer menu
  3. Click the plus icon below Condition: If... and press the button Device selection
  4. Select one of the device’s channels you need (1-2 / 1-6 for WRC2 / WRC6 and 2-3 for SPDR)
  5. Select short or long key press
  6. Save the program with the OK button
  7. Trigger the program by pressing the button as configured in step 5. Your device might indicate success via a green LED or similar. When you select the device in Status and control > Devices on the CCU, the Last Modified field should no longer be empty
  8. When your channel is working now, you can edit it to select the other channels one by one
  9. At the end, you can delete this program from the CCU

Ich musste das damals bei den HmIP BRC2 auch machen, damit sie mit Homey funktionieren.
Die Anleitung stammt von der Home Assistant Integration.