Hi everyone, Has anyone else experienced issues with newer Aqara FP300 sensors in Homey via Zigbee? My setup: Homey Pro 2019 (no Matter support) Aqara app in Homey FP300 paired directly via Zigbee What makes this confusing is that one FP300 installed about a week ago still works perfec…

I follow this thread with great interest. I have more or less the same issue that you describe using zigbee with FP300 (six of them). No Aqara Hub involved, they are directly connected to Homey. They work fine for about 24h before they stop reporting on all indicators/sensors (motion, presence, lux,…

Update on my end, plus a direct question for @TedTolboom . @Trond_Nordfjaern - thanks for that data point. Your experience essentially rules out IKEA routing as the root cause on its own, since you’re seeing the same 24-hour dropout without any significant IKEA infrastructure in the path. Consistent…

[image] Ken_Hansen: Removed all IKEA TRETAKT plugs, replaced with ThirdReality Gen 3 If you still want to use TRETAKT plugs in Homey: they also pair to a Hue bridge, so you can add them to Hue and then integrate the Hue bridge in Homey, so you can still control them. I have a TRETAKT in my H…

Two updates. First, situation on my end is getting worse. Since my last post, 2 of my FP300s escalated from motion-only stuck states to complete no-detection (no motion, no presence). “Try to Repair” still resolves it, but they drop again within ~24 hours. So the pattern is not just holding — it’s …

I’m also having problems with my newly bought FP300 sensors in Homey. I installed them using zigbee, and after some time (possibly 24h as mentioned before) they stop working. Yesterday they suddenly started working again, and dropped out again after some time. I’m a bit confused about where the pro…

[image] [APP] Aqara & Xiaomi Smart Home - Simplify your life with a smarter home Apps The Aqara FP300 sensor reporting issues should be solved with the v1.16.3 update of the app

I suspect that is the reason why they started working magically yesterday, but today they are not working again. Ive done a repair so they are working again, i will let you know if it stays that way.

I had exactly the same issues described in this thread. It worked perfectly for about two months, then something changed and the sensor started getting stuck in the “motion detected” state, detecting presence when nobody was there, not turning off presence when someone left the room and sometimes be…

I can report that my sensors keep working for almost 3 days in a row now. However, the temperature, humidity and luminance is not reporting as configured. I have it set up on the default values of 3600s, but two of my sensors have 22h ago since their last report, and the third has 2 days ago. So it …

Hi . I have the homey Pro 2026 model and I installed the fp300 sensor. I have had nothing but problems with it, exactly what previous people have reported. I tried switching to Matter and it was worse than on Zigbee. I have swapped back to Zigbee but still not working. Motion and Presence alarms not…

Firmware problem with Aqara - Presence Multi-Sensor FP300

Devices

TedTolboom July 16, 2026, 11:03am 34

Topic		Replies	Views
Issues with Aqara FP300 Devices zigbee , homey-pro	57	2046	October 9, 2026
Aqara FP300 with Matter! Devices	281	16892	August 27, 2026
Aqara FP300 (lumi.sensor_occupy.agl8) Presence and Motion Stay Active in Homey, Works Correctly in Aqara Home Devices homey-pro	8	219	August 18, 2026
Aqara Door/Window sensors stop responding after 1-2 hours with HP2023 Devices zigbee , homey-pro	88	4373	May 6, 2026
Aqara FP300 support implemented in Aqara app Apps app , zigbee , advancedflow	5	773	July 31, 2026

Firmware problem with Aqara - Presence Multi-Sensor FP300

Related topics