Bought the Homey 2019 edition and tried to do the first steps with the Homey (Logitech Harmony was recognized) and bought a Fibaro Shutter 3. Cant get it paired. However, all 3 shutter devices in Fibaro App are NOT mentioning Version 3. So no support yet?

I submitted a request to the developers: [image] Support for Fibaro Roller Shutter 3 (FGR223) and Aeotec Nano Shutter (ZW141) Devices As this is an Athom app, we are not able to comment on what they will/wont to. Its great you have found the magical link to request device…

So it’s because it’s not supported. No generic solution possible until support will be there? Dont want to unplug the whole mess. Unfortunatly I cant use the switch right now. Would be enough but either I did wire sth wrong or even the switch does need the Fibaro 3 to be recognized

Ill be honest, I didn’t even check to see if it was a supported device, I assumed you had as it is your device. If it is not, Yes it is likely that you could fix it yourself, simply by adding the new ‘productID’ to the code and then doing a CLI install. Check out how to install an app using CLI a…

I just ordered a Homey and 2 Figaro shutter V3 assuming it would work but it doesn’t? That is very disappointing!

[image] Bisch: Unfortunatly I cant use the switch right now. Would be enough but either I did wire sth wrong or even the switch does need the Fibaro 3 to be recognized If you can’t use the switch, you might have connected it wrong. Homey has nothing to do with the physical connection to the …

Thanks Jamie! That sounds like a solution I have been looking for. I will try that tonight when home. But Id also be fine to wait for an update if I could still use the switch. That leads me to Fire69 :slight_smile: Can you confirm the Fibaro Shutter 3 works behind a switch without being at least …

[image] Bisch: but Im not 100% I was 99.9% sure :slight_smile: Until I read the manual. Calibration using connected momentary switch Make sure: • the device is supplied, • momentary switch is connected to S1 and S2 terminals, • the device added to the Z-Wave network, So yes, it might …

Hey Fire69, thanks for looking into it. I’ll try Jamie’s solution in about one hour. I understood how to install apps using nodejs I guess. I hope I ll find out the rest. ProductID, where to put ProductID, whether overwriting Fibaro Shutter 2 device is the correct approach etc… I’m new to Z-Wave an…

I was thinking a bit more about this… Not much can be done wrong to connect it if you would install it without the switch. L/N/2 outputs to the motor. I would connect just those and then still try the calibration with the B-button: Calibration using the B-button Make sure: • the device is sup…

No joy, now Im in the driver.compose.json of the fibaro app. Id like to modify the json of the FRG-222 to allow the FRG-223. I want to change the given productid 12288 into the ID of the Shutter 3 but I cant find the ID anywhere

Fibaro Shutter 3 not supported yet?

Questions & Help

bobsilesia January 21, 2019, 8:35pm 2

I submitted a request to the developers:

Topic		Replies	Views
Adding fibero roller shutter 3 fails in homey Questions & Help	36	4744	June 12, 2021
Be carrefull, "rollershutter 3" from Fibaro does not work on Homey for venetian blinds Questions & Help	35	2473	January 30, 2022
Venetian blinds + Fibaro Roller Shutter 2 + Fibaro Athom B.V. - No Rotation control Questions & Help	21	4278	April 24, 2024
[APP] Fibaro - Your home is your castle (by Athom) Apps app , official	1066	53390	August 11, 2026
Fibaro Walli, do they work with Homey? Devices	97	9761	February 20, 2022

Fibaro Shutter 3 not supported yet?

Related topics