Hi all! I bought my Homey early 2019 a few weeks ago and up to now I really enjoy using only 1 app instead of 7 to control my home :slight_smile: In the kitchen I have an Aqara Motion Sensor which I use in combination with some Ikea Trådfri lamps. The idea is to switch all the lights on in the kit…

[image] Wolter: However, this motion sensor checks (based on what your preference is) between 60 till 86400 for motion. I use 60 seconds. I now have a flow that the lights turn of in case there is no motion detected. This works, but the lights in my kitchen will go off and directly on when i’m s…

Yes, I do. Looks like the motion sensor switches automatically to no motion detected after the 60 sec. Then immediately back to motion detected. The lights also react like this -> off after 60 sec and immediately on again.

Try setting a higher value (65 or 70 seconds). Perhaps (not sure, can’t test myself) the value you can set is the timeout period, not the grace period. If that’s the case, setting the timeout to exactly the same value of the grace period (which might be fixed to 60 seconds), what happens is: the …

@Wolter First load the App named Chronograph. Than you have to make 2 Flows… 1st Flow (Light goes on) : When: -motion sensor detect motion And: it is after sunset Than: -Turn light on -Start or replace Timer (Chronograph) - give the timer a name and a run time. 2nd Flow: (turn the light o…

This was the issue! I changed it to 65 and now it works like a charm. Thanks for this Robert! And also thanks for the other tips, I’m learning a lot :slight_smile:

Hello, I wonder how you added the motion sensor to Homey. Via the internal Zigbee network? The reason why I am asking this is that I have configured my Aqara motion sensor via deCONZ on a Raspberry Pi. I do not get it managed that the lights will remain on as long as I have motion in front of the …

Hello, The motion sensor can be added to Homey via the Aqara & Xiaomi ZigBee app, which can be found in the Homey appstore. With the system you use I have no experience. In the meantime I also found out that you can hack the motion sensors. This makes it possible to report motion every 5 seconds. …

[image] Wolter: hack the motion sensors Thanks Wolter! I will have look into this.

I only see videos to do it with solder. Not with the pencil is it just drawing in the two points(color it) or make a line between them or something? Do you need to repair/reboot the device? Are the settings you need to change in the app?

Aqara Motion Sensor - Ikea Trådfri

Devices

Picsou621 September 23, 2019, 2:16pm 4

Your flow is much to simple, you have to use a countdown or logic cards. Maybee this post can help you: Kitchen light goes of

Topic		Replies	Views
Aqara Motion Sensor P1 Geräte	31	2998	November 28, 2022
Aqare P1 sensor? Devices flow , homey-bridge	7	1284	October 27, 2023
Best indoor Motion Sensor? Devices	117	10194	March 9, 2026
Hue Motion Sensor im Gäste WC Flows (DE) homey-pro	60	1596	November 21, 2023
Help me understand homey's thinking Questions & Help homey-pro	15	1247	May 25, 2023

Aqara Motion Sensor - Ikea Trådfri

Related topics