Purpose The difference of this app and the already existing solar panels app is that this app reads the data directly from the inverter. The solaredge api and others are mostly limited to 300 calls/ day, so you get only updates every 10-15 minutes. The modbus app receives data every few seconds. …

using solaredge AND statement “inverter power higher than” returns error I’m trying to determine if the power being generated is higher than 7000W, if yes charge car with 9A, if no, check if power is > 4000W, if yes charge with 5A, if no do nothing I assume I need to use the inverter power higher …

thanks will check it, I think on the compare I made some mistake, for now you can also use 1 of the logical flow ones.

found it , I fixed it, probably tonight or tomorrow will give the test version where this is fixed. here it is SolarEdge + Growatt TCP modbus | Homey should work now

You are a legend! It works great, Thanks for your quick reply and actions!

Don’t know if this is the right place for it, but how would I go about creating a variable that shows the average power generated in the past 5 minutes? I would like to use that to switch on/off the EV charging and determine at what amperage it should charge Cheers!

I use Insight Trends Reloaded. for that. [Screen Shot 2024-03-09 at 15.00.10]

That’s awesome! I will try something similar Thanks! can I donate with paypal or ideal?

Just want to let you know that the value reported by the inverter as daily yield is in fact the daily yield minus energy stored in the battery the today’s yield minus what the battery was charged and plus what the battery was discharged. Total yield today is 12.8kWh: [IMG_9402] The app only repo…

yes also solar power (with batt ) = pv - charging the battery, after sunset it is discharge of batt. in the end normally it comes back at some point. did not check it but charge from grid makes it negative on solar power. daily is based on “energy_total”: [0x9c9d, 2, ‘ACC32’, “Total Ene…

I noticed this today: [IMG_6521] Does someone knows what this means?

[APP][Pro] SolarEdge + Growatt TCP modbus

Apps

Edwin_Biemond March 9, 2024, 2:00pm 848

I use Insight Trends Reloaded. for that.

SolarEdge Inverter App, hoe te configureren

Topic		Replies	Views
[APP][Pro] SMA Energy - My home. My energy. Our climate Apps app , homey-pro , pv-solar	535	30841	July 28, 2026
[APP][Pro] Solis Hybrid Inverter (v0.1.63 - Test) Apps energy , flow , pv-solar	10	210	July 12, 2026
[APP][Pro] Modbus - Connect every Modbus devices Apps app , homey-pro , advancedflow	583	18239	July 26, 2026
[APP][Pro] Huawei Solar - Smart energy for a better life Apps	325	19187	January 24, 2026
[APP][PRO] Connect Solar Solax Inverter to Homey Apps app	201	8738	June 29, 2026

[APP][Pro] SolarEdge + Growatt TCP modbus

Related topics