[App][Pro] Sofar (Release 1.1.34, Test 1.1.35)

Apps
21

@Adrian_Rockall 60hz - now 60.05Hz

22

hi,

yes 60hz, may vary to 60.06hz this morning

23

I have just checked and the app should accept up to 65Hz and I see from the log that you are using an older version. Could you install the test version as that should fix the issue.

24

i only find version 1.1.24 on homey app store

25

Did you follow the link above?

26

hello @Adrian_Rockall ,
i have installed the 1.1.28 test version and * 2025-04-17T22:12:49.737Z Frequency 59.95 is not valid

60.01 is not valid also

  • 2025-04-17T22:12:44.070Z
    ************** App has initialised. ***************

  • 2025-04-17T22:12:44.084Z
    2025-04-17T22:12:44.084Z [log] [ManagerDrivers] [Driver:battery] BatteryDriver has been initialized

  • 2025-04-17T22:12:44.089Z
    2025-04-17T22:12:44.089Z [log] [ManagerDrivers] [Driver:grid] GridDriver has been initialized

  • 2025-04-17T22:12:44.093Z
    2025-04-17T22:12:44.093Z [log] [ManagerDrivers] [Driver:solar_panel] SolarPanelDriver has been initialized

  • 2025-04-17T22:12:44.097Z
    2025-04-17T22:12:44.097Z [log] [ManagerDrivers] [Driver:summary] InverterDriver has been initialized

  • 2025-04-17T22:12:49.248Z
    Found Inverter: IP: 192.168.0.38, S.No: 2768796139

  • 2025-04-17T22:12:49.252Z
    Checking register 14 for grid frequency:

  • 2025-04-17T22:12:49.257Z
    send_request: start = 14, end = 14, fc = 3

  • 2025-04-17T22:12:49.532Z
    No MODBUS data to process data

  • 2025-04-17T22:12:49.538Z
    Returned null.

Checking register 1156 for grid frequency:

  • 2025-04-17T22:12:49.542Z
    send_request: start = 1156, end = 1156, fc = 3

  • 2025-04-17T22:12:49.729Z
    Data received: {
    “type”: “Buffer”,
    “data”: [
    23,
    107
    ]
    }

  • 2025-04-17T22:12:49.737Z
    Frequency 59.95 is not valid

  • 2025-04-17T22:12:49.739Z
    Returned null.

Checking register 524 for grid frequency:

  • 2025-04-17T22:12:49.741Z
    send_request: start = 524, end = 524, fc = 3

  • 2025-04-17T22:12:49.904Z
    No MODBUS data to process data

  • 2025-04-17T22:12:49.908Z
    Returned null.

Checking register 33282 for grid frequency:

  • 2025-04-17T22:12:49.909Z
    send_request: start = 33282, end = 33282, fc = 3

  • 2025-04-17T22:12:50.136Z
    No MODBUS data to process data

  • 2025-04-17T22:12:50.140Z
    Returned null.

Checking register 33282 for grid frequency:

  • 2025-04-17T22:12:50.142Z
    send_request: start = 609, end = 609, fc = 3

  • 2025-04-17T22:12:50.350Z
    No MODBUS data to process data

  • 2025-04-17T22:12:50.354Z
    Returned null.

No suitable inverters found

27

I have published a new test version that fixes a silly mistake with the range checking.

28

Hi @Adrian_Rockall ,
1.1.29 accept now 60hz +/- and i could install the 4 devices.
The app seem not to receive the voltage.
Br

29

Which voltage?
I can see the grid voltage, the PV voltages and the battery voltage in the log.

30

@Adrian_Rockall
sorry, i meant the battery voltage…and the inverter status.

BR

31

@Adrian_Rockall how the add this widget please ?

32

If you mean the dashboard widget, then open the dashboard, select the edit :pen:, tap on the +, then select the Apps tab and find the Sofar widget. In the customise screen select the devices for each category and save it. Finally click on Done.

33

@Adrian_Rockall
Sorry to make your precious time lost, i have found dashboard/widget on fone; i were looking for it on PC webpage. i could instal your sofar widget and it’s marvellous.

34

Unfortunately, Athom haven’t made dashboards work with the web app, which is very disappointing.

2 Likes
35

And no Windows desktop app neither

36

Grazie per l’app prima di tutto, vorrei chiedere se ci fosse una possibilità di escludere i valori fuori scala. nel mio insight trovo (forse a causa della connessione del logger con il wifi o altro) dei valori completamente errati che rovinano le statistiche. vedi allegato.
grazie.

Screenshot 2025-04-27 alle 21.42.54
Screenshot 2025-04-27 alle 21.42.541772×388 36.7 KB

37

It’s difficult to know what are bad values. I could put a setting for a limit.

38

I understand, actually setting some parameter ceiling could eliminate a lot of the problem Maybe even a value discard time setting. thanks for the support.

39

Hi, i have installed version 1.1.29 today and my app stop working.

  • 2025-05-12T17:33:21.391Z
    Found Inverter: IP: 192.168.1.133, S.No: 2734238489

  • 2025-05-12T17:33:21.398Z
    Checking register 14 for grid frequency:

  • 2025-05-12T17:33:26.515Z
    Returned null.

Checking register 1156 for grid frequency:

  • 2025-05-12T17:33:30.352Z
    Frequency 49.94 is good

  • 2025-05-12T17:33:30.357Z
    Found inverter

  • 2025-05-12T17:33:39.443Z
    Missing one or more of Frequency = 49.96, Consumption = 0, Grid_Voltage = 239, Total_Import = 0

  • 2025-05-12T17:33:52.116Z
    Missing one or more of Frequency = 49.95, Consumption = 0, Grid_Voltage = 239, Total_Import = 0

  • 2025-05-12T17:34:04.824Z
    Missing one or more of Frequency = 49.99, Consumption = 0, Grid_Voltage = 239.3, Total_Import = 0

  • 2025-05-12T17:34:17.361Z
    Missing one or more of Frequency = 49.99, Consumption = 0, Grid_Voltage = 239.3, Total_Import = 0

  • 2025-05-12T17:34:29.740Z
    Missing one or more of Frequency = 50.01, Consumption = 0, Grid_Voltage = 239.10000000000002, Total_Import = 0

  • 2025-05-12T17:34:55.932Z
    Missing one or more of Frequency = 49.97, Consumption = 0, Grid_Voltage = 239.4, Total_Import = 0

  • 2025-05-12T17:35:08.249Z
    Missing one or more of Frequency = 49.96, Consumption = 0, Grid_Voltage = 239.60000000000002, Total_Import = 0

  • 2025-05-12T17:35:22.973Z
    Missing one or more of Frequency = 49.97, Consumption = 0, Grid_Voltage = 239.3, Total_Import = 0

  • 2025-05-12T17:35:37.581Z
    Missing one or more of Frequency = 49.93, Consumption = 0, Grid_Voltage = 238.70000000000002, Total_Import = 0

  • 2025-05-12T17:35:54.120Z
    Missing one or more of Frequency = 49.95, Consumption = 0, Grid_Voltage = 239.10000000000002, Total_Import = 0

  • 2025-05-12T17:36:17.011Z
    Missing one or more of Frequency = 49.97, Consumption = 0, Grid_Voltage = 239.10000000000002, Total_Import = 0

40

@Adrian_Rockall Thanks to your work we’ve been using your app for over a year.

About 6 days ago, the app lost contact with our inverter (but the inverter is posting readings to sofarman online. The app icon does not show offline, just 0 in the power readings, also the logger is 6 days old.

How to debug this?
e2039dcd-a124-43f7-9566-e677e8b32f41