Hi there! Thank you for this magnificent app. I recently got a Daikin Caldo XRH40 and a wifi module of the B-series and it’s worked like a charm to integrate it into Homey. There’s only one thing that does not work and that’s the “Powerful” advanced mode.
I followed the instructions in the above post to use /aircon/get_control_info before/after triggering “Powerful” in the Daikin iOS app (not the remote). It looked like this:
Airflow rate 2/5, powerful off:
ret=OK,pow=1,mode=3,adv=13,stemp=20.0,shum=0,dt1=21.0,dt2=M,dt3=20.0,dt4=27.0,dt5=27.0,dt7=21.0,dh1=40,dh2=50,dh3=0,dh4=0,dh5=0,dh7=40,dhh=50,b_mode=3,b_stemp=20.0,b_shum=0,alert=255,f_rate=4,f_dir=3,b_f_rate=4,b_f_dir=3,dfr1=A,dfr2=5,dfr3=4,dfr4=A,dfr5=A,dfr6=5,dfr7=A,dfrh=5,dfd1=3,dfd2=0,dfd3=3,dfd4=1,dfd5=1,dfd6=0,dfd7=3,dfdh=0,dmnd_run=0,en_demand=0
Airflow rate 2/5, powerful on:
ret=OK,pow=1,mode=3,adv=2/13,stemp=20.0,shum=0,dt1=21.0,dt2=M,dt3=20.0,dt4=27.0,dt5=27.0,dt7=21.0,dh1=40,dh2=50,dh3=0,dh4=0,dh5=0,dh7=40,dhh=50,b_mode=3,b_stemp=20.0,b_shum=0,alert=255,f_rate=4,f_dir=3,b_f_rate=4,b_f_dir=3,dfr1=A,dfr2=5,dfr3=4,dfr4=A,dfr5=A,dfr6=5,dfr7=A,dfrh=5,dfd1=3,dfd2=0,dfd3=3,dfd4=1,dfd5=1,dfd6=0,dfd7=3,dfdh=0,dmnd_run=0,en_demand=0
It looks like it’s the “adv=2/13” that does it. Is there any chance this could be implemented in the Homey app? Happy to continue debugging different command combinations if needed!
