HEM (2nd edition) Model: DSB28_ZWEU, 3Phase4 60Amps
, and for this also only 1. clamp is visible. Probably Athom did not included 3.clamp version in their Aeotec app.
It would be nice, if they add support for this also (It worked for me in Fibaro system, but now I moved to Athom universe )
Aeotec Home Energy Meter ZW095 1 phase and Aeotec Home Energy Meter ZW095 3 phase have same productId and productTypeId.
And now, with app Aeotev v2.0.18 - 04.01.19 form https://apps.athom.com/app/com.aeotec, you can not pair with Aeotec Home Energy Meter ZW095 1 phase (because it’s not support multiChannelNodes).
So I must rebuild and customize source code to work with Aeotec Home Energy Meter ZW095 1 phase and Aeotec Home Energy Meter ZW095 3 phase. But I only can use one of them, that’s mean when I use Aeotec Home Energy Meter ZW095 1 phase, I can’t use Aeotec Home Energy Meter ZW095 3 phase
This is just bull… I’m waiting for support for 3 clamp power meter for at least 1,5 years. Opened request on diferent pages like requested by moderators. Opened ticket with athom now for the second time…
With openhab it worked 2 years ago I first installed it no problem.
Aeotec made an error there, using the same Id’s for two different products… Guess Athom will have to create two devices so one can choose which one to pair but auto-discovery won’t be possible then @MatthewWaanders ?
After some thinking I would advise to create a seperate app for the 3-clamp device, based on everything for Aeotec but without all other devices. Think that will be the best solution, don’t know if Athom will be happy with it but as long as there is no “Is this device multichannel” during discovery I don’t see another workaround? Or maybe @Caseda has some brilliant idea?
If you want to read data from the clamps ( kWh, Watt, Voltage and Amperage for each clamp ), you must go to advanced setting and set parameters 101, 102 and 103 with value 4144911
It’s the way you can read kWh, Watt, Voltage and Amperage for each clamp.
Thanks, I tried this implementation, but as my device is not Gen5 device it adds mine clamp meter as basic.
If I could undestand, how to change needed for my device settings in this improved app, then I could to this, but it is at moment too complicated to me.
I have this, Model: DSB28_ZWEU, 3 clamp device, as mentioned earlier
Any chance that the group meter ZW095-C1A60 will be supported in the future? Also known as HEM1 60A Z-wave Plus Gen 5 with 1 clamp. I tried the beta app, and it is recognized upon pairing , but fails to complete the pairing sequence
How do one set these values? Do I go to advanced senttings on the 3-phase device and from there to Raw Configuration Parameters? If so How the raw parameters are set? It says id, size, value; etc. ID is 101 or 102 or 103 and value in all cases is 4144911? What is the size?
If the question seems noob, thats because I’m new to homey…