Very strange behavior. I setup a very simple flow. I am using a ZooZ dimmer switch in this scenario. [image] When I test it before saving by pressing the blue start on the first card, it works flawlessly. I monitor it on my phone to see it happening in real time and also confirm within the web ap…

I finally figured it out. All of the input from everyone helped me along the way and finally troubleshoot a working flow. Thank you everyone. Hopefully more advanced settings become available from ZooZ so it doesn’t have to be so hacky. Wall dimmer switch, ZooZ ZEN72, directly controls two recesse…

So maybe you can help me. I am trying to achieve the below. When I turn on a dimmer switch on manually from the wall, turn on to 25% during the time of 9pm and 6am. All other times, turn on to 100%. Every suggestion was to do the following as to not have the dimmer ramp up to 100% and then go to …

[image] Ruckus: When turned off → dim to 1% → then turn off Change to: When turned off AND dim is not 1% → dim to 1% → then turn off Assuming that you can set dim to 1% when it is turned off.

[image] Ruckus: So when turned off → dim to % → then turn off That’s not what I meant, and it causes a loop When turned off → dim to % (this causes most lights to turn on with dimlevel %) → Then turn off Now the flow starts again immediately, because: When turned off → dim to % (this cause…

Normally the flow should be something like this: WHEN:the ZooZ dimmer switch is flipped AND: the master closet is turned on True THEN: dim master closet to 25% and turn off master closet False THEN if time between 21:00 and 6:00 True THEN dim master closet to 25% False THEN dim master closet t…

Yes I did not understand and I honestly still don’t quite wrap my head around all this. However, I think I may have confused everyone thinking that I have both a smart switch and smart bulbs. The switch is the only thing that is smart. So, the switch is the only thing that controls the lights so I c…

I unfortunately don’t have a WHEN for Zooz that is toggle of/on but just a Turned On, Turned Off, or Dim Level Changed. So the only way for me to copy your flow is to do the following. However, I am not sure this won’t cause the same loop I was dealing with before. [image] These are my construct …

I think there is a language problem: “Turned off” can mean “When the switch is toggled to off” or it can mean “when the light is switched off”. I thought it means “when the switch is toggled to off”. By the way: if no flows are defined in Homey, nothing should happen when you toggle the switch. If…

[image] Rmb: By the way: if no flows are defined in Homey, nothing should happen when you toggle the switch. If the light goes on or off, the switch controls the lamp directly and that connection shall be destroyed… The lights turn on and off, or dim normally if no flows are defined in Homey …

I could just not be asking the right question and confusing everyone, which if the case I apologize. To clarify: The switch is wired directly to the lights. And the lights are not smart, just the switch is. Would it be possible to use the zwave flow to send a raw command directly to the switch to…

That clarifies your problem. There must also be a setting to disconnect the input (your toggle switch) from the output (the connected lamp). So the lamp is controlled only by flows.

Advanced Flow Working in Test State But Failing Once Saved

Questions & Help

Ruckus June 8, 2024, 5:33pm 21

This unfortunately does not work. Every time I turn it on it turns on to 25%, instead of 100% that is expected outside of the 21:30-6:00 time frame.

Topic		Replies	Views
[APP] Zooz - Let's build smarter tech together Apps app	61	700	June 13, 2026
Advanced flow - long press button dimmer - Any ideas? Flows advancedflow	22	7681	August 27, 2024
[HOWTO][PRO] Dim lights with buttons using transitions Tutorials flow , homey-pro	35	10819	June 30, 2023
Tutorial - Advanced automatic light control with flows Tutorials tutorial , flow	50	24723	July 20, 2023
Lights controled by motion sensor need to stay on for a set period of time and not go out during event Flows flow , advancedflow	12	467	February 5, 2025

Advanced Flow Working in Test State But Failing Once Saved

Related topics