I was wondering if I can get my two awnings into Homey via some particular switches. Currently they’re hardwired and controlled either manually or via two sensors (wind or wind and lux) These are the controllers (Somfy). The upper one controls the sensors and both awnings. The other two are for eac…

There’s lots of Somfy going on here. Just curious, wasn’t any existing post of any use? https://community.homey.app/search?context=topic&context_id=48221&q=Somfy&skip_context=true

Let me check your link but I was looking around already but didn’t understand where to start and with what hardware wise. I also lack the proper understanding how the current hard-wired setup actually works…

A number of owners are happy with [image] FIBARO | Roller Shutter 3 - motorized shades and blinds The radio-controlled smart Roller Shutter 3 works with motorized roller blinds, venetian blinds, awnings and gates. Smart blinds and smart gates are now controlled within your smart home net…

I’m not sure, but it looks like those bottom two might actually be wireless RTS switches rather than hardwired ones. If so, you’d be able to copy the signal using the Somfy RTS app on Homey and control the awning that way. If it is fully hardwired, then using something like a Shelly 2.5 or the afor…

everything is hardwired I checked with the guy who set this up. There’s one questions that bothers me: How can I keep the current sensor actions “wind” and “light”, they are linked to the topmost switch and move both awnings. Ideally I’m able to switch these also remotely. If this is not possible …

Honestly, I’m not entirely sure how that would work with the sensors. It might be a good idea to remove the switch covers and see what the wiring situation looks like, both to see whether what you want is doable, and whether there’s even room to place a Shelly/Fibaro.

[image] thobu: Most important : I’d like to keep the switches but this should be doable w/ Fibaro/Shelly, right? Yes, with fibaro it is, it’s in the manual: [fibaro_switches]

[image] thobu: There’s one questions that bothers me: How can I keep the current sensor actions “wind” and “light”, they are linked to the topmost switch and move both awnings. In the Fibaro manual Light or Wind sensors aren’t mentioned. At the Shelly diagrams I couldn’t find that either. I d…

I found this manual for the switch Somfy Soliris Uno that drives the awning based on wind and lux. There’s a diagram on page 2. I hope this helps a little … For the other two manual switches, Somfy Smoove I need to figure out if they are really hardwired. Thank you for looking into it.

Homeyfi my hard-wired awnings

Questions & Help

Peter_Kawa June 10, 2021, 8:43am 11

YW! To me it looks like you can connect a fibaro or shelly without interfering with the sensors and they keep functioning

Topic		Replies	Views
Wireless switch for fibaro roller shutter 3 Devices	0	437	October 9, 2020
Homey-Compatible Outdoor Sun Sensor for Blinds – Any Ideas? Questions & Help homey-pro	7	213	April 1, 2025
Venetian blinds + Fibaro Roller Shutter 2 + Fibaro Athom B.V. - No Rotation control Questions & Help	22	4212	April 24, 2024
Zonnescherm keuze motor en aansturing Vragen & hulp	36	4430	July 25, 2020
Welche Jalousien Aktoren? 🇩🇪 Deutsch (German)	5	628	October 3, 2021

Homeyfi my hard-wired awnings

Related topics