Homeyduino icm Ajax alarmsysteem

🇳🇱 Nederlands (Dutch)
,
7

Waar loop je vast?

In jouw code mis ik het ota password of de Home Assistant API encryption key
(Ben benieuwd hoe je 'm dan in Home Assistant hebt toegevoegd)

Voorbeeld:

esphome:
  name: "presence-badkamer"
  friendly_name: "Presence Badkamer"
  includes:
    - uart_read_line_sensor_ld2410v3.h
  on_boot:
    priority: -100
    then:
      - script.execute: get_config

esp32:
  board: esp32-s2-saola-1
  framework:
    type: arduino

# Enable logging
logger:
  baud_rate: 0
  logs:
    sensor: INFO # DEBUG level with uart_target_output = overload!
    binary_sensor: INFO
    text_sensor: INFO

# Enable Home Assistant API
api:
  encryption:
    key: "XQxxxxxxxxxxxxxxXQ="

ota: 
  - platform: esphome 
    password: "99xxxxxxxxxxxxx99" 
    #num_attempts: 3 
    #safe_mode: none

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  #use_address: 192.168.1.10
  # Manual IP if needed
  #manual_ip: 
    #static_ip: 192.168.1.150
    #gateway: 192.168.1.1
    #subnet: 255.255.255.0


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Presence Badkamer Hotspot"
    password: "kfxxxxxxxxxxyz"

substitutions:
  device_name: dev-sensor

web_server:
  port: 80
  version: 2
  include_internal: true
  ota: false

captive_portal:

uart:
  id: uart_bus
  tx_pin:
    number: GPIO18
  rx_pin:
    number: GPIO33
  baud_rate: 256000
  parity: NONE
  stop_bits: 1

sensor:
  - platform: dht
    pin: GPIO9
    temperature:
      name: "Temperature"
      id: temperature
      filters:
        - offset: -1.0
        - sliding_window_moving_average:
            window_size: 10
            send_every: 10
    humidity:
      name: "Humidity"
      id: humidity
      filters:
        - sliding_window_moving_average:
            window_size: 10
            send_every: 10
    update_interval: 10s
    model: DHT11

Als je het IP adres van het ESP bordje weet, kun je hem toevoegen aan Homey als nieuw apparaat: