Hi, this update is killing my devices. First smpl display stopped working and lookes like bricked, then my multi color lights (lidl added as generic zigbee device) stopped changing colors and display some error with with unknown cluster… Is there a way how can I downgrade without any need of re-addi…

[image] Jiri_Pech: (lidl added as generic zigbee device) Btw, why generic ? Have you tried to add them via Tuya or via Lidl app ? (I would recommend Tuya)

Right now it shows that ita ready for pairing, but when i try to repair device in homey its not connecting (same as lots of smpl display user :roll_eyes:)

These panels are not recognized by any app (tuya or lidl)… My experience is that only bulbs from lidl are supported, any other zigbee lights from lidl is recognized as generic zigbee device (and sometimes doesnt have some capabilities - so I had to make custom copy of tuya app and write my own drive…

[image] Jiri_Pech: not recognized by any app (tuya or lidl) And you used TEST Tuya app, correct? [image] Jiri_Pech: i try to repair device in homey its not connecting Just to be sure, go to Homey Developer Tools , and try to ping every device which is ROUTER - if every one will respond…

Is it not accepting generic zigbee devices anymore, but requiring a dedicated app? In a recent firmware (10.2.0) there was a new requirement implemented, I think. I also have a couple of Lidl bulbs and RGB spots that does not have support in any apps. Will they be useless? _TZ3000_7dcddnye _TZ30…

[image] Sharkys: Usually PTP is not required for so long but you can still simply try to do a another restart. Usualy a PTP is not necessary but sometimes it will help. PTP, at least 10 minutes. [image] [HOW TO] ptp Tutorials PTP [image] A lot of questions are as…

[image] Mike1233: 10 minutes. That article was written back in 2019, while being HomeyPro owner of different models ~6 years, I never had to do PTP for so long, more over I do not think for HP2023 10 min is required to discharge circuits at all. This is based on my experience with 70 Zigbee d…

@Sharkys I did have to do a PTP once with my HP19, and a normal reset did not work. With my HP23, I have not done a PTP once. Only a reset after a firmware update. But when someone states that they have tried everything like also unplugging and plugging in and it still doesn’t work. Then a PTP mig…

Tried test, and regular… :slight_smile: I have posted request for adding those lights to Homey forum, but its more than year without adding anything I have requested. So, I have added one type as generic zigbee device (and everything worked as charm until 10.3.0) and build custom version of tuya zig…

[image] Sharkys: Just to be sure, go to Homey Developer Tools , and try to ping every device which is ROUTER - if every one will respond, check which firmware you are running on the same page and what is the status. If everything is OKay, maybe you can also try factory reset and reflash, eg. via…

Homey Pro 2023 firmware 10.3.0 - zigbee is broken

Questions & Help

Mike1233 February 16, 2024, 11:43pm 14

Usualy a PTP is not necessary but sometimes it will help.
PTP, at least 10 minutes.

Topic		Replies	Views
Homey don't find zigbee units after last updated to version 10.0.6(09.02.2024) Questions & Help zigbee	108	3880	February 3, 2025
Homey Pro 2023 Zigbee Issues Questions & Help homey-pro	94	5633	September 12, 2024
Homey lost connections after updates, with Lidl and Tuya-zigbee devices Questions & Help app , zigbee , flow , homey-pro	55	1614	March 25, 2024
Zigbee issue with Homey Pro 2026 migrated from Homey Pro (Early 2023) using USB Restore Questions & Help bugreport	173	2943	April 13, 2026
[Homey Pro 2023/2026/mini] Informationen und Diskussionen zu neuen Firmware-Updates 🇩🇪 Deutsch (German) firmware , homey-pro-2023 , homey-pro-mini , homey-pro-2026	667	24255	April 29, 2026

Homey Pro 2023 firmware 10.3.0 - zigbee is broken

Related topics