I bought multiple Aqara devices with the Zigbee protocol. I could connected almost all door and window sensors and one of the two motion sensors. The other motion sensor doesn’t connect. The screen of the app (Aqara app) stays on the picture where it tells you to push the button for 3 sec till the l…

Hue’s and Homey’s zigbee are separate mesh networks, they can’t be joined. And, a router or end-device can be paired to one controller only; In your case it’s either paired with Homey, or with Hue. Both networks are unaware of eachother. [image] ProofofD3ath: Unfortunately I don’t have other…

18 direct connected devices is possible, try to add more router devices (mains powered zigbee devices) and try again. Temporary turn off none-Aqara zigbee apps can help. Change power plug for an other 5V / 2A(or higher) model. PtP Homey (cut power for 11 minutes).

Thanks for the response but what do you mean with [quote=“Peter_Kawa, post:2, topic:67177”] Change power plug for an other 5V / 2A(or higher) model. [/quote] i don’t have an power plug but motion Sensor. So a philips light bulb is a router then right if connected to homey directly? And how will th…

[image] ProofofD3ath: Change power plug for an other 5V / 2A(or higher) model. The Homey powerplug is meaned, some powerplugs get bad after some time and can be the reason of strange problems.

Thanks for the suggestions but this didn’t help in my case :frowning: I also found this article Creating-a-stable-Zigbee-network and there I see the same about routers and end devices. Unfortunately I don’t have other Powered Zigbee devices except Philips Hue light bulbs. Only if I throw a light bu…

[image] ProofofD3ath: The other motion sensor doesn’t connect. What type of aqara motion sensors do you have? Are both of the same type? The aqara P1 is not supported yet…

Thanks for this but I have two the same sensors and not the P1, one connects and the other not.

This helped thanks. The only downside is like you mentioned that Zigbee Mesh is dynamic and it will take the shortest route to the hub like mentioned in this topic zigbee-network-rebuild-heal where the person refers to this site Zigbee Smartthings so if homey will be offline for 15 till 30 minutes a…

[image] ProofofD3ath: it will take the shortest route to the hub Not in my mesh. Connections are very unlogical and mostly don’t take the shortest route…

[image] Peter_Kawa: and mostly don’t take the shortest route Humans typically think that “shortest route” has to do with physical distance, which isn’t necessarily how a Zigbee device “sees” the world :grinning_face_with_smiling_eyes:

Can't connected new aqara motion sensor to Homey

Questions & Help

FKey August 16, 2022, 8:48pm 7

What type of aqara motion sensors do you have?
Are both of the same type?
The aqara P1 is not supported yet…

Topic		Replies	Views
Can’t connect aqara devices to homey bridge Questions & Help zigbee , homey-bridge	23	4711	September 10, 2022
Can't add Aqara-units to Homey anymore?! Apps	18	2567	July 31, 2023
Aqara Motion Sensor - not using zigbee routers? Questions & Help zigbee	8	1428	February 3, 2022
Aqara doorsensor reporting last status 56 years ago Devices	15	267	February 16, 2026
No longer possible to add Aqara devices Questions & Help zigbee	28	1991	December 14, 2023

Can't connected new aqara motion sensor to Homey

Related topics