AppPage Tesla Power Connect | Homey Source GitHub Description The app is based on discovered APIs → Tesla Motors Club The APIs from the changer can change without any notice, and the APP will need to be updated when changed. Supported Devices Tesla Wall Connector Gen 3/Universal Limitations The TWC can’t be controlled. Power Sharing only provide access to the main TWC; data from the slaves are not accessible. Development plan I welcome anyone to join the project and help with the development. Send me a PM, and we will find a solution. Debugging/Issues If experiencing issues create a diagnostic report from the app. Firmware If you have issues connecting to your TWC, it could be a firmware issue. Check the “firmware_version” on your TWC on this URL: http://TWC-IP/api/1/version, set your IP for TWC-IP. This page on Tesla’s webpage can be a helper https://www.tesla.com/support/charging/wall-connector/troubleshooting Official firmware release notes: Wall Connector Release Notes Other information I recommend taking a look at Wall Monitor Any feedback is welcome :slight_smile:

Seems like it. Have you tried to uninstalled and installed the homey app ? That could potentially fix the issue.

Hey community! :waving_hand: Version 4.0.0 of the Homey Tesla Power Connect app is now available! Here’s what’s new. :globe_with_meridians: Automatic Device Discovery (mDNS): The app now automatically discovers your Tesla Wall Connector on your local network, no more manually entering IP addresses. A manual IP fallback is available if mDNS fails. :satellite_antenna: New Capabilities: Three new sensors have been added: Signal Strength (WiFi RSSI), SNR (Signal-to-Noise Ratio), and Thermopile Voltage. The signal and SNR sensors give you a much better picture of your TWC’s wireless health directly in Homey. :microscope: Debug Visibility: A new “App Debug” section under Advanced Settings shows polling status, last success/error timestamps, and running counts, making connectivity issues much easier to diagnose. :shield: Stability & Reliability: Polling is now resilient to transient network errors and will no longer silently stop after a brief network hiccup. :high_voltage: Performance & Memory: Memory usage has been reduced through differential settings updates and elimination of excessive discovery logging, along with a general code cleanup throughout. :globe_showing_europe_africa: Translations: The app is now available in 12 languages. Feedback and bug reports are welcome. Enjoy! :high_voltage::automobile:

Lost the connection with the tesla wall charger gen3. Uninstalled the app and tried reconnecting but without result. Connected to FW update 26.2? [image]

Hi Do a «Create Diagnostics Report» when you get the error, and I can try to fix the issue. Rune

Just installed a new TWC Gen3 Wall Connector, then immediately installed your app on Homey. I was hoping for a card to control turning charging on/off. Unfortunately, unless I’m missing something I don’t see it. In fact, I don’t see any actual action cards. I see “When” cards, and “And” cards, but nothing under “Then”. What I’m really wanting to do is be able to start/stop the charger from Homey Flows. What am I missing? FYI, I’m not using this with Tesla cars - have two Audi EV’s.

Hi, Tesla has not released any API’s for controlling the TWC. So unfortunately until they do so, the TWC only provides data. Cheers

Bummer. Right now, I can control the circuit that the charger is on using other means, but it’s turning on/off the circuit, so the charger then has to reboot when I turn it on again. It appears to be OK with that - same situation as a power outage really - but I’d rather be able to just manually tell the charger to start/stop from Homey. I’m using the cars to dump excess solar in the afternoons when the house batteries are full. Otherwise, I only want the charger energized during EV charging rates overnight.

There is a homey app for Audi, seems to be in early development. [image] myAudi | Homey Smart Audi, smarter home [image] [APP][Pro] myAudi - Connect your Audi EV or PHEV Apps Control and monitor your Audi directly from Homey. Flows, automations, live data — all without lifting a finger. What is this app? myAudi connects your Audi electric or plug-in hybrid vehicle to Homey via the official Cariad API (the same backend used by the myAudi app). No cloud subscription beyond your existing myAudi account is required. The app runs entirely locally on Homey Pro — no additional cloud services, no extra fees. Supported vehicles Driver Examples battery Audi – E…

I was excited to see someone picked up the myAudi app for Homey. Thanks for that. Now for the bad news - can’t get past the login. I tried logging out of the app on my phone and logging back in and accepting the terms and conditions. Still no good. Any ideas? FYI, US Based, 2022 OG Audi etron

[APP][Pro] Tesla Power Connect - Stay charged, always connected

Apps

Rune_Vaernes June 15, 2026, 4:33pm 116

There is a homey app for Audi, seems to be in early development.

Topic		Replies	Views
[APP][Pro] Tesla Smart Charger Apps	573	26652	January 16, 2024
[APP][Pro] Tesla Car & Energy - Zero emissions. Zero compromises Apps app , homey-pro	1372	37396	November 4, 2026
[APP][Pro] Fronius Wattpilot — Local EV Charger Control Apps app , homey-pro	33	517	October 18, 2026
[APP][Pro] Wallbox Charger - Smart EV charging technology made simple Apps app , homey-pro , community-app	107	2075	October 29, 2026
[App][Pro] Zaptec charging Apps app , homey-pro	130	5663	November 4, 2026

[APP][Pro] Tesla Power Connect - Stay charged, always connected

Related topics