Modbus A small tool to add every Modus/TCP device to Homey [HomeyPro_Modbus_AppLogo] [image] Modbus Connect every Modbus devices This tool allows to add any Modbus/TCP device to Homey without a specific app. You can read and write Modbus register with fl…

Sorry attach file https://github.com/user-attachments/files/18782860/Communication.Protocol.SmartComfort.365_EN_Rev06.pdf

Short version: connect the device using the IP address, Port 502 and ID 1 Use the “Read holding register” flow card Use the register number from page #3 decimals values are stores as integer. For temperatures, you have to calculate /10 (see examples/unit column) the PDF has “address” as column tit…

Sorry, working 7 days a week so not a lot of time to spend on Homey… At the moment it looks like writing in test mode is not working at all. Reading bits is working quite well, maybe a bit slow but that can be the issue of Homey :). Already a few weeks it’s reading the state of different door and wi…

Can you show me some examples if you have some time? I wonder whap happens in your case. It just reads INT16, addes the bit with a bitmask and writes back the INT16. Or is it a 2 register field? Shouln’d be one if using Bits :thinking:

Hello @all, Hello @Ronny , I’m absolutely Happy that I found this App because I want to get access to my Weishaupt heat pump via Modbus. But somehow I can’t install the App on my Homey Pro (2019). I klick the Install button and get the message : “Modbus wird in Kürze auf Homey installiert”. But t…

Hi, perhaps this issue. [image] Cannot add new apps to Homey suddenly Questions & Help Hi, all of a sudden, I cannot add any new apps to Homey (early 2019). It says “app will be installed shortly” like usual, but nothing happens - the new app does not appear in the list of…

Hi Ronny, thank you very much for this fast reply. Your tipp helped very much. It seems that this was my problem. After I mentioned in this post that I have the same problem it was solved and now I have the ModBus App on my Homey :slight_smile: thanks Marcel

If for example the wired MODBUS TCP/IP connection is still alive, but there is for a certain period no connection with the internet (cloud). Will the modbus data be stored on the Homey pro device, and does it send the data to the cloud once the internet connection is back? And how much data can be …

The app just sends the data if the flow card is processed. If there is an error, the flow card errors (error output at the bottom of the card). There is no queueing.

As an alternative to data queuing; might it perhaps an idea to install and use the “micro web server” on my local network? Theoretically this than grant’s that the modbus data flow continues even though the internet connection is lost? And use port forwarding to access remotely the “micro web server…

[APP][Pro] Modbus - Connect every Modbus devices

Apps

RonnyW March 25, 2025, 9:23am 435

Hi, perhaps this issue.

Seems it’s fixed now.

Topic		Replies	Views
[APP][Pro] SolarEdge + Growatt TCP modbus Apps app , pv-solar	1885	61890	October 25, 2026
[APP][Pro] Support for Fronius inverters and smart meters Apps app , homey-pro	93	5523	September 13, 2025
[APP][Pro] Huawei Solar - Smart energy for a better life Apps	325	20325	January 24, 2026
[APP][Pro] Huawei FusionSolar Manager Apps	391	5639	October 28, 2026
[APP][Pro] SMA Energy - My home. My energy. Our climate Apps app , homey-pro , pv-solar	553	33097	October 19, 2026

[APP][Pro] Modbus - Connect every Modbus devices

Related topics