[APP][Pro] Easee charger - Small. Smart. Full of power

Apps
310

Here u go :slight_smile: the short version.

I use the P1 meter of the house to see what i have to put in the car (it measures every 10 sec).

  1. First i calculate the watts to amps:

    homey-ev-charge-with-solor-cal-ampere
    homey-ev-charge-with-solor-cal-ampere1224Ă—211 27.2 KB

  2. Then i calculate how many Amps i have to put in the car:

    homey-ev-charge-with-solor-weg-branden
    homey-ev-charge-with-solor-weg-branden865Ă—217 22 KB

So the Amps from charger minus the Amps of the house = the Amps i have to set the charger to.

  1. Now i know what to set the charger on…
    homey-ev-charge-with-solor-lader-instellen
    homey-ev-charge-with-solor-lader-instellen1886Ă—1979 471 KB

I could put the variable straight in the set “dynamic charger current” but i put a extra check in it to make sure that the value is correct.

I don’t stop the charging of the car (don’t want that) but offcourse this is easy to add if u want to.

I’m going to make a long post on our website and youtube channel.

This is how i looks like in real life:

P1:

homey-ev-charge-with-solor-chart-01
homey-ev-charge-with-solor-chart-011253Ă—392 33.2 KB

Charger:

homey-ev-charge-with-solor-chart-02
homey-ev-charge-with-solor-chart-021256Ă—408 35.4 KB

Sometimes to charger jumps a bit when there is no sun but this is not a real problem. I tried to fix this using the “average or trends card” but was not happy with the results.