Anyone Using Zigbee Retrofit Blinds on Homey? Here’s Our Zemismart ZMP1 Test

Devices
,
1

We’ve been testing the Zemismart ZMP1 Zigbee Roller Shade Driver in a Homey Zigbee environment (Homey Pro) and wanted to share some practical integration notes for anyone working with smart shading setups.

This is a Zigbee-based retrofit motor designed to convert existing roller blinds into position-controlled smart shades.

:link: Pairing & Basic Control (Homey Zigbee)

Device pairs as a standard Zigbee endpoint and exposes position control (0–100%) in Homey.

Once added, Homey provides:

  • Percentage-based blind position control

  • Scene / flow integration (open, close, set position)

  • Basic state feedback

微信图片_20260427171850_1772_75
微信图片_20260427171850_1772_751920×1334 78.4 KB

:gear: Configuration / Calibration Behavior

In practice, configuration is handled through device settings exposed after pairing.

Observed controllable parameters include:

  • Travel limit calibration (upper / lower endpoints)

  • Motor direction inversion (useful depending on installation orientation)

  • Position alignment adjustment after full calibration

微信图片_20260427171852_1773_75
微信图片_20260427171852_1773_751920×1334 102 KB

:battery: Battery Reporting

Battery status is exposed as a standard Zigbee attribute and is visible inside Homey device settings.

  • Battery level reporting works in percentage format

  • Suitable for automation (low battery notification flows)

微信图片_20260427171854_1774_75
微信图片_20260427171854_1774_751920×1334 80.2 KB

:globe_with_meridians: Additional Information

For anyone interested in hardware details, specifications, or installation information, more details can be found on our product page:

:backhand_index_pointing_right: https://www.zemismart.com/products/zmp1

:handshake: For Community Testers / Integrators

We also welcome experienced Homey users and smart home enthusiasts to contact us for professional testing and technical experience sharing.

2

Hi Zemismart, I have 6 of your ZM25Z chain motors and they work great, been using them for a few years.

Would it be possible to add the same features to the the ZM25Z motors. Like battery monitoring and 1 tap open and close.?

Would that be possible?

Many thanks

3

sorry, ZM25Z is our new 2N wiring required motor.

you may sent the wrong module number, could you send pic or order number to check

4

Hi,

These are what I have

https://www.aliexpress.us/item/3256805847916457.html?invitationCode=UWZ2SzlVNnRLdzNac1pOZkgyVG5PTEJISHZuTEh0TmNhT1EvZGRQRTB3NGpmdlBzNkVmWTlBPT0&srcSns=sns_Copy&spreadType=socialShare&social_params=61512339789&bizType=ProductDetail&spreadCode=UWZ2SzlVNnRLdzNac1pOZkgyVG5PTEJISHZuTEh0TmNhT1EvZGRQRTB3NGpmdlBzNkVmWTlBPT0&aff_fcid=c716caf834a24e19a3b99c0a87344652-1778225046585-01040-_EGk0uSa&tt=MG&aff_fsk=_EGk0uSa&aff_platform=default&sk=_EGk0uSa&aff_trace_key=c716caf834a24e19a3b99c0a87344652-1778225046585-01040-_EGk0uSa&shareId=61512339789&businessType=ProductDetail&platform=AE&terminal_id=2ee642e4360c49a0b028cd6936ca2cc3&afSmartRedirect=y&gatewayAdapt=glo2usa4itemAdapt

They pair to homey as a ZM25Z which i believe is a roller shade motor.

Screenshot_20260508_104243_Homey
Screenshot_20260508_104243_Homey1080×476 29.1 KB

5

hi,

Your requirement is that this motor can be connected to Homey, but you also want to add battery monitoring and a one-touch switch code that can be viewed in the Homey app.

am i right?

6

Hi, yeah that’s correct.

Thankyou

7

ok,i will try to feedback to our team.

8

There is also avmatter version right?

9

yes, we have matter version: MTP1,Zemismart Matter over Thread Built-in Battery Blind Driver Retrofit Roller Shade Motor HomeKit Google Home Assistant Smartthings App Siri Control Shipped from US,EU,CA,CHN

10

hi we tested it with battery state now, could you check the one you had?

822809f1-89ae-4cbe-a958-9966cc3e2851
822809f1-89ae-4cbe-a958-9966cc3e2851578×473 15 KB

5fdf8b81-ce61-4573-bfe7-4f97b20e751f
5fdf8b81-ce61-4573-bfe7-4f97b20e751f600×467 36.4 KB

abf9b891-bf23-48a2-9183-ff37cadfa526
abf9b891-bf23-48a2-9183-ff37cadfa526532×473 19.9 KB

496cea40-f300-4f96-a8e8-14091c26a817
496cea40-f300-4f96-a8e8-14091c26a817630×405 25.8 KB

4cbb6003-d845-4c78-ae43-a86ddf77991d
4cbb6003-d845-4c78-ae43-a86ddf77991d581×465 36.7 KB

11

Thankyou, Do I need to delete my current blinds from homey and re-add them?

12

I’m curious how you’ve managed to integrate the Smart Roller Shade Driver into Homey so far, since it wasn’t even supported by the Zemismart app yet. Maybe through one of the Homey Tuya apps?

If that is the case, you will need to delete the SRSD from Homey and add it again from scratch using the Homey Zemismart app. All the flows would then have to be repaired as well.
It may be possible to automatically repair the flows using a script. You can find more information about the script here: [HOW-TO][Pro][Cloud] - Tool to FIX (advanced) flows after removing and re-adding devices

Before you do anything, please let us know how you currently have the SRSD paired with Homey.

13

Hi, yeah I have the current chain motors linked above connected through the zemismart app currently and they work fine (been using them for over a year and work perfectly) but only basic functionality. It seems they are paired as a roller shade motor rather than chain motor.

Ill delete them and try and re-add then using the zemismart app.

14

No, don’t delete them, pls.
Install the latest test version of the Zemismart app → Zemismart | Homey
After that, try to “Repair” your devices. This means that the devices essentially go through the same process as if they were being added for the first time, but without having to delete them first.
If this doesn’t add the new features, you’ll probably have no choice but to delete the devices and add them all over again.

15

Thanks, I didn’t see the test version was available.

16

Ok, I’ve done a repair to the device but no battery info is shown so maybe I have got to delete them and re-add them to homey

17

kindly try this: https://homey.app/a/com.zemismart.iot/test/

18

Thankyou, I’ve re paired the motors to homey and now have battery reporting as well as extra settings allowing me to set limits and direction.

Thanks again.