ROBB smarrt Z-wave and Zigbee app This app adds support for the ROBB smarrt Z-wave and Zigbee devices sold by ROBBshop.nl working on the Z-wave and Zigbee protocol . Links: ROBB smarrt app Athom apps ROBB smarrt app Github repository Supported devices Z-wave devices Dimmer - 2 wire (onoff, dim, meter_power, measure_power) Dimmer - 3 wire (onoff, dim) Dimmer - rotary (onoff, dim, meter_power, measure_power) Switch (onoff capability) Wall plug (onoff-, meter_power, measure_power capabilities) Remote control 4 channels (1x click, Key held, Key released, all groups on or off, Scene 1 and Scene 2, direct association towards other Z-wave devices) Remote control 5 channels (1x click, Key held, Key released, all groups on or off, direct association towards other Z-wave devices) Wall controller 2 button (1x click, Key held, Key released, direct association towards other Z-wave devices) Wall controller 4 button (1x click, Key held, Key released, direct association towards other Z-wave devices) Wall controller 8 button (1x click, Key held, Key released, direct association towards other Z-wave devices) Wall controller RGBW (1x click, Key held, Key released, direct association towards other RGBW Z-wave devices) LED Dimmer - White (onoff, dim) More Z-wave devices will follow soon Zigbee devices Dimmer - 2 wire (onoff-, dim- , meter_power, measure_power capabilities and ‘set forced brightness’ action card) Dimmer - 3 wire (onoff-, dim- capabilities and ‘set forced brightness’ action card) Dimmer - rotary (onoff-, dim- capabilities and ‘set forced brightness’ action card) Switch (onoff capability) Wall plug (onoff-, meter_power, measure_power capabilities) Wall controller 2 button (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) Wall controller 4 button (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) Wall controller 8 button (Switch on, Switch off, Dim up / Key held (up), Dim down / Key held (down), Dim stop / Key released) LED Dimmer - White (onoff, dim) More Zigbee devices will follow soon Note: Supported Languages: English Dutch Acknowledgements: This app and driver development has been supported by: @TedTolboom Feedback: Any requests please post them in the ROBB smarrt topic on the Athom Community forum or contact me on Slack Please report issues at the issues section on Github otherwise in the above mentioned topic. If possible, please report issues at the issues section on Github otherwise in the above mentioned topic.

I think you’re talking about the version after 2.1.0 ? I got 2.1.0 installed last night but no support for this zigbee remote control yet.

Hi Ted, I tested the Robb Zigbee wall plug with 2.1.0 just now and it works perfectly. The only strange thing is that they all report 2.18 kWh after adding to Homey. This isn’t a problem for me because I don’t use that part only the current power usage. Thank you very much!

[image] Harm-Jan_Kolthof: I think you’re talking about the version after 2.1.0 ? I got 2.1.0 installed last night but no support for this zigbee remote control yet. Yes, correct. Driver is nearly completed, but missing the scene buttons, for which I will need to make some modifications to the Zigbee clusters. [image] Paul_Wierstra: The only strange thing is that they all report 2.18 kWh after adding to Homey. This isn’t a problem for me because I don’t use that part only the current power usage. Thanks for reporting this back. Only during initial meter report and then succeeded by actual meter reports or does this value remains and is not updated?

It’s only the initial value that’s 2.18 kWh, could be the internal chip reporting the value? Afterwards they are updated properly, so it’s not a huge issue.

Hi, any chanse of having this work in RobbSmarrt app? Sunricher Zigbee dimmer ProdID HK-SL-DIM-A DeviceID 257 ProfileID260 Was on Homey 4.2 but was id´d as an basic zigbee device. I then upped to V5.RC47 but it is still id´d as an basic zigbee device. Thanks.

[image] Marius_Muresan: Hi, any chanse of having this work in RobbSmarrt app? Sunricher Zigbee dimmer ProdID HK-SL-DIM-A DeviceID 257 ProfileID260 Can you indicate which device this is?

No need to do anything anymore, changed to fibaro dimmer 2. Thanks/Marius

Hi, Yesterday I bought and installed the Sunricher 9040 (Zigbee dimmer installed in a 3-wire system). I had problems including it to version 4.2. So after a while I took the bald move to upgrade to version 5 experimental. Much easier to include. The problem is that it only being recognized as a ”basic zigbee device” Added info 2021-01-22: Product ID: HK-SL-DIM-A [image]

[image] Marius_Muresan: Sunricher Zigbee dimmer ProdID HK-SL-DIM-A DeviceID 257 ProfileID260 Seem to be the same as the one of @Marius_Muresan. You do have to give the Device ID and Profile ID as well, or confirm its the same. Maybe with V5 you have to interview the device and give the info to @TedTolboom https://developer.athom.com/tools/zigbee

[APP] ROBB smarrt Z-wave and Zigbee app

Apps

TedTolboom December 13, 2020, 4:55pm 160

Can you indicate which device this is?

Topic		Replies	Views
[APP] Zooz - Let's build smarter tech together Apps app	61	970	June 13, 2026
[APP][Pro] EasyLighting - Make smart home easy Apps app , z-wave , zigbee	246	7729	October 25, 2026
[APP][Pro] Relax Moes Zigbee Apps app , zigbee , homey-pro	38	813	July 7, 2026
[APP][Pro] Philips Hue Zigbee (Without the bridge) Apps app , zigbee	1184	63484	October 27, 2026
[APP][Pro] Zigbee2MQTT - Use Zigbee devices via MQTT Apps app , zigbee , tools , homey-pro	609	28664	October 24, 2026

[APP] ROBB smarrt Z-wave and Zigbee app

Related topics