With the Remotec Scene Master ZRC-90 it is possible control any other devices (including non-Zwave) or set states / variables via Homey’s flows. The following triggers are supported:
Button Pressed 1x (within 1 second)
Button Pressed 2x (within 1 second)
Button held down (5x per secon)
Button released
Note: All commands will be send to Homey. With this device it’s not possible to associate buttons to other devices to control them directly (without Homey).
Yes, I’ve just tested the ZXT-120 with my Daikin.
Works almost perfect. What I mean by that, very fast response, most important functions work e.g. temperature setup, mode setup, fan speed, swing, ON/OFF.
Almost perfect because the fan speed I could only get it working when the ZXT-120 was in “Always Listening” mode and not in “FLiRS” mode.
The issues not being able to get the ZXT-120 working in FLiRS mode are being looked into…
but are not device / app specific. There are currently multiple FLiRS devices that run into the same issue. Athom is looking into them at this moment.
The new update on the ZXT-120 has worked out for me. Before I couldn’t get my Samsung AC to cool but now it works.
Thanks Ted good work again on this thing.
I have questions about the temperature readings.
1.
I would like to use these as a condition in a flow but the flow charts don’t exist. Could you make these for us? I have solved this now by writing a better logic variable on temperature change which I then use in the flow which activates the AC. But this is a flow extra which wouldn’t be needed.
2.
How many readings does the device do because it seems to be stuck at 1 temperature where the room is cooled down. I use the device powered and in Always Listening mode.
I can’t find in the specifications at what interval the temperature is being reported. I know it is being reported with every command being send to the device (similar to battery reports).
There are no options build in to change the reporting interval / threshold (unlike the ZXT-600).
I could implement a polling interval on the temperature values. Can you create a new Github issue for this feature request?
Works perfect! I also use it for home, sleep and lights. Beside that I use it to start my robotvacuum, netflix and a demo to show the capabilities of Homey
There will be some changes released soon that will make the actual usage of the Scene Master even more fun…
For the Z-wave based dimming devices in my own apps (MCOHome, Logic Home and Steinel) as well as for the Fibaro Dimmers (using the dimmer-2 myself), I’m currently testing 2 new action cards, that trigger the dimmer to start a dim level change (with direction) and stop a dim level change.
Enabling a more direct and easier (no more better logic values) way to control your dimming devices with the Remotec Scene Master (or Aqara wireless button):
Start level change (disabling flow required due to retriggering of key held scene):
Will be releasing this update to the MCOHome, Logic Home and Steinel apps on short term and adding the same functionality to the Fibaro app (pending approval Athom).
Hi, the app is really good and I have the scene controller doing exactly what I want.
Any chance we can get the ZTS-100 (think its called ZTS-110 in some markets too) added?
It is a really good z-wave thermostat and there are a lot out there, especially in Australia.
Here is a link to the manual;
