Central Topic for
You could also use this if you have the gateway.
If it isn’t working please let me know.
2 Likes
It works perfectly! Will test it further! Is there a possibility to add the status? Standby, tap water, central heating etc? Thanks for all the effort!
There is a status for the burner, the tap and the pump. When the pump is on, I think the central heating is being circulated.
1 Like
Wow I was happy to see that there’s finally an app for it, but when I want to add my Incomfort Gateway I get an error. See my screenshots. Anybody else has had this? After login I can choose 2 “Gateways”, maybe this has to do with the fact that I have an Intergas Xtreme + an Intergas Xtend (hybrid heatpump)? Even if I deselect one of them, I still get the error.
Edit: Now I see that @sorted.bits is the developer, so hopefully you can help me with this 
I waited almost a year for this 
1 Like
I meant display code my mistake.
displ_code: <value>,
85='sensortest'
170='service'
204='tapwater'
51='tapwater int.'
240='boiler int.'
15='boiler ext.'
153='postrun boiler'
102='central heating'
0='opentherm'
255='buffer'
24='frost'
231='postrun ch'
126='standby'
37='central heating rf'
Hey, if you log into the developer console for Homey, using : Homey Developer Tools and you search for the Intergas device, you are able to see it’s settings in the list.
What does it say for updateInterval there for you? Make sure to blur out your IP and password please, not sure if you want that leaked.
If you wouldn’t mind being my guinea pig, here is a new test version, with both the status codes and also a fix for the updateInterval message, I hope.
1 Like
Hey Wim, I’m going to try it, no problem. I’m used to run beta versions on several machines 
That’s nog possible, because I don’t even get that far, so there isn’t an Intergas device installed. I just tested 1.0.3 and i’m still getting this error:
This is my heaterlist, I got 2. One is my Xtend Hybrid heatpump (the 2212…), the other one is my Extreme CV (2301…)
Thanks for testing so quick. I wonder what ‘invalid_setting_type’ means. Could you maybe expand a bit on what type of Homey, software version, etc? Let me try to get some extra logging in there, so that I can see what your gateway is responding to you.
I will post a new version to test in a bit!
Maybe this? setSettings does not work for all types of settings
Ik zelf heb helemaal geen problemen, installatie en functionaliteit werken hier 100% Bedankt voor het toevoegen van de displaycode!
I answered you via DM. It works now with version 1.0.5
1 Like
Really nice to see there is an app for this now. Just in time, as I got my heatpump installed yesterday
Just a couple of questions, hope you can help me!
Is there any manual which describes how to login?
What is the gateway host, is that the IP-adress I have for my gateway in my Comfort Touch app?
Which username? The one I use for login into the Comfort Touch app or standard ‘Admin’?
Which password, the one for the comfort touch app or the one on the back of the gateway?
Hey!
Thanks for asking and you are totally right.
The host is the IP adres for the gateway in your own network. I am not sure you can find this in the app, but you should be able to find it in your router somewhere.
The username is usually ’admin’.
Password is indeed on the back of the device.
Thanks, that helped. Was not the ip-adres as shown in my Comfort Touch app. Router showed me the right ip-adres. Got it up and running now, nice to integrate into my flows.
One more question, after adding the new device in Homey, it shows me 2 new thermostats. If I read the posts above, seems to be caused by the fact that I have a Heatpump and a CV. Which thermostat should I then use in my flow? Maybe both?
Furthermore, keep up the good work!
That is a very setup specific question. I would try experimenting with it.
I only have access to a CV, so not sure how the heatpump would need to be controlled.
1 Like
Hi still a newbie and not able to connect. When I enter the login data with the same gateway host (IP), username and password I use to login to the webinterface of the incomfort gateway the spinner on the ‘versturen’ button keeps spinning…
Any ideas? Thanks in advance!
Hey,
Thanks for your message, maybe you can check the ‘console’ in the browser (F12 in Google Chrome) and tell me if anything pops up. Otherwise, could you tell me some more details? Homey version, is the Gateway on an internal IP?
Thanks!
Wim
