Home Assistant - Community App [large] [image] Home Assistant Community | Homey Connect to Home Assistant Happy with this app? Thank you for supporting community app development with a small donation via PayPal (send to friends). [btn_donate_LG1] This …

[image] Simone_Erle: I assume the last two issues are caused by incorrect device configuration. Additionally, I cannot understand how to view the total consumption, even though the device exposes the measure_power value. Homey simply doesn’t show this data in EnergyDashboard charts. That’s …

Hello, great App. I have one issue though. The Thermostat Capability feature is a very helpful addition. However, only one thermostat can be used per device capability. Is it possible to expand the app so that multiple thermostats can be used? For example, I would need comfort-, normal-, and reduce…

Hi, this is not how it would work in Homey. A thermostat device can only have one GUI control - defined by target_temperature and measure_temperature capabilities. It’s not possible to add more. Such mode dependent values would be set as device settings for a manufacturer app. So you can only de…

When using the advanced virtual device (AVD) of the Device Capabilities app , it’s possible to have multiple thermostats in one device. When you add the 3 separate HA thermostats to Homey, and hide those in the UI (possible since Mob v9.9.0 Web v1.16.0), you can have those mirrored to an aforementi…

Are they added as subcapability? I think I already tested it and it only worked for main capabilities. But perhaps Athom added this feature in the meantime. Then I have to check if I can extend the “add input_number entity as thermostat” feature if subcapabilities would pe possible.

Hi Ronny, Yeah I’ve tried with a custom device, but the “trick” Arie (Godschalk) uses didn’t work. I’ve tried with a combo of main and subcapababilities, just similar to the screenshot below. The AVD capabilities look like this below, indeed the additional thermostats are added as subcapababiliti…

Hi Peter, Thanks so much for the tip. I actually found a ready-made template in the Advanced Capabilities section that matches the one you described in your post. With about 10 adjustable parameters and roughly twenty sensors (which need to be imported first using the HA Community app), it does ta…

[image] Peter_Kawa: The AVD capabilities I can also add several HA entities as target_temperature. This is one main and one subcapability. [grafik] The difference is: When adding an entity as subcapability, the capability ID is defined based on entity: measure_numeric.input_number.ther…

Great find, Ronny. I just tested, adding additional thermostats to a HAC app climate device, and it works when using (consecutive) numbers as part of subcapababilities, like measure_temperature target_temperature measure_temperature.02 target_temperature.02 measure_temperature.03 target_tempe…

New test version 1.15.1: Fixed subcapability issue for thermostat capability (input_number entities). When using subcapability (to add more than one thermostat), the subcapability ID is now fixed to not use additional points in subcabability to bypass the Homey issue. [image] Home Assis…

[APP][Pro] Home Assistant - Community App

Apps

RonnyW May 23, 2026, 8:16am 1500

Is your question about HA Community app or HA integration? I think you are referring to second one. Please post in matching app topic.

Topic		Replies	Views
[APP][PRO] Home Assistant - Community App (deutsch) Apps (DE) home-assistant	311	7384	February 17, 2026
Homey integration for Home Assistant - Now Available! 🎉 Developers	178	4734	June 4, 2026
[LIST] NEW published App in Homey App store :rocket: - Get 'em while they're hot Apps app , list	644	36058	June 5, 2026
[Requests] Homey Pro Community App Requests Apps	368	143463	May 28, 2026
[App][Pro] SmartThings Community (was the HCS version 2) Live 2.0.35, Test 2.0.39 Apps	420	11702	May 29, 2026

[APP][Pro] Home Assistant - Community App

Related topics