I have a go-e charger Smarte Ladestationen für Elektroautos: mobil & stationär | go-e and want to make a homey app for it. So far I can add the device from a local network and use homey to read it’s values: [image] GitHub - phatenl/nl.phate.goecharger Contribute to phatenl/nl.phate.goec…

For a longer period the measurement of voltage was showing 1V in the device and in the measurement tags in Homey. Though the android app showed the correct value. I figured out today what was wrong. My charger is connected with 1-phase schuko socket. When I “switched” the schuko other way around t…

Blockquote Would it be possible to add more accuracy to the total energy consumption (eto). The api documentation says it should be available with 0.1kWh resolution. I’m not sure how. The value is in tenths of a kWh. i.e. “130 means 13kWh charged” I only divide by 10 to get to actual kWh. But th…

That’s ok. I thought that some rounding is made in the Homey app, but the accuracy from the go-e device itself is as accurate as it can be. So it changes on 10 increments 10->20 = 1kWh->2kWh.

I changed to three phase connection so it’s not needed on my behalf. But if you make some change I can help to test it though.

Hello, I have 2 go-e chargers at home. I have problems managing both with Homey. For example, I am not able to : check “car plugged in” in each charger set stop/allow-charging only for one charger receive notification "charging How do you deal with this ? Thanks and regards, Paul

Exactly. The next step in Tim_Willemsen ’s agenda is to make it possible to switch between single and three-phase charging with the Go-e Charger app! I guess so :wink: (this comment is followed by a short silent prayer)

Do you mean that when you add two go-e chargers these actions and status are mixed for both chargers.

Hello, yes , the actions are mixed between the 2 chargers. I found a way to partially fix the problem. I am using HTTP request flow cards and sending the following commands :slight_smile: adjust amps curl “ http://1.2.3.4/api/set? amp=16 ” #set 1-phase curl “ http://1.2.3.4/api/set? psm=1 ” #set 3…

Would be nice if @Tim_Willemsen would have the time in some point to fix this. But luckily one can use the http requests or the mqtt api.

[APP][Pro] Go-e Charger electric car charger

Developers

Tim_Willemsen August 18, 2022, 5:30am 75

I’m sorry, I’m afraid the only way to fix that is to redesign the whole app. Right now that’s not on my agenda.

Topic		Replies	Views
[APP][Pro] go-e Charger Apps app , homey-pro , sdk3	135	4757	April 12, 2026
[APP][Pro] Peblar EV Charger - Plug in. Power up. Automate Apps app , community-app	109	2128	July 21, 2026
[APP][Pro] Easee charger - Small. Smart. Full of power Apps app , official	429	24286	July 1, 2026
[APP][Pro] ChargeAmps Apps app , energy , homey-pro	270	5727	August 3, 2026
[App] Go-e (official) Apps	17	215	August 4, 2026

[APP][Pro] Go-e Charger electric car charger

Related topics