Howdy, I have the Homey Pro 2023 and 4 zigbee plugs where 2 are placed in my greenhouse and 2 of them are placed in between the homey and the greenhouse to be able to extend the signal there since the greenhouse is kinda far away from the Homey Pro. I do however get really crappy connection over at…

[image] Patrik_Wall: Is there any way to check how the devices are connected to each other and/or change this? No, and no. Did you pair the two plugs in the greenhouse from the greenhouse, or did you pair them next to Homey and then moved them to the greenhouse? Usually you should use the fi…

Oh really? I thought zigbee was a self healing network so that the connections can move freely when things change, if I remove a router or add another one etc, maybe this is not the case? But yes, I did plug all 4 of them in just next to the homey when I first added them, and then I moved them to t…

[image] Patrik_Wall: Oh really? I thought zigbee was a self healing network so that the connections can move freely when things change, if I remove a router or add another one etc, maybe this is not the case? It will usually work that way, but not always. You can re-pair them without first …

I started messing around with this: Trying to readd them, didn’t work, the plug in the pump house was found and as you said, it responded with “Device already added”. The other 2 plugs in the greenhouse wasn’t seen by the homey app and homey just sat there waiting for a device to enter pairing mo…

What brand are your plugs? It sounds like they’re having issues with routing for other devices and finding better routes.

They are Nous A1z, have their own dedicated app in Homey and users report they working correctly. [image] Nous zigbee socket A1z Devices Looks like there’s a dedicated app for NOUS now thanks to @SergeP : Nous App for Homey

Homey, as Zigbee controller, has almost no influence on how Zigbee devices interact with each other in a mesh. Devices should be finding optimal routes automatically, and Homey cannot tell a device that it should take a particular route, or use a particular router. You basically have two issues: t…

I have 4 fire alarms using Zigbee, but i went and removed all 4 plugs just to be safe and then resetting the zigbee network from Homey Pro Developer Tools. First I repaired the fire alarms (good to see that they remain in Homey after a reset but just need a new adress!) Then I added the zigbee plu…

It could be that for some reason, the devices are using a lower power output during the pairing process (I think that one of my IKEA drivers also officially needs to be paired next to the controller, but I never did and it paired just fine anyway). So what you could try is to pair the greenhouse pl…

Hmm yeah, but it didn’t reach even from the pump house during the paring process, so I would have to pair them inside the house and move them back out (as I did originally). I seriously doubt that routers can be used during the pairing process though as I tried moving one of the greenhouse plugs di…

Zigbee mesh connections?

Questions & Help

Patrik_Wall September 16, 2024, 1:08pm 7

They are Nous A1z, have their own dedicated app in Homey and users report they working correctly.

Topic		Replies	Views
Extend Zigbee coverage? Questions & Help	38	596	August 5, 2026
[HOW TO] Plan and setup your Zigbee network Tutorials zigbee , tutorial , homey-pro , homey-bridge , howto	39	17179	April 25, 2025
Is it possible to force Zigbee mesh usage Questions & Help zigbee	39	10322	December 8, 2020
ZigBee Mesh or no Mesh Devices zigbee	51	9118	May 15, 2021
Zigbee Optimierung Fragen & Hilfe	65	7121	April 4, 2022

Zigbee mesh connections?

Related topics