Today my bathroom and toilet both have a manual system in place, where the light switch also starts a humidity fan. If i want to automate the light, I will also have to automate the fan (otherwise it’s always on). Which humidity sensors and smart switch (for the fan) do other people use?

I use two Xiaomi Aqara humidity sensors, one in bathroom and one in e.g. the study. If difference between the two is bigger than 7% start fan, if lower than 5% stop it again (or in my case high and medium setting on central ventilation Itho). The Xiaomi sensors are cheap on Chinese sites. And they w…

My setup for this is an Aeotec Multisensor 6 (permanent powered) which I use both for motion and humidity, plus a Fibaro double switch which controls the light and fan. Once someone starts the shower, the humidity level jumps up quickly. The fan will stop after either the humidity level drops clos…

I have installed a Xiaomi Humidity sensor in the bathroom that triggers a flow that puts on the ventilation with a KUKA on/off. In combination with the app ‘countdown’ the ventilation stays on when the humidity is above 70%, evertime the humidity changes and it’s still above 70% the countdown will …

Could you share your flows? I’m probably setting up the same system soon.

Sure. They’re in Dutch, ask if something is not clear enough. The flow have been created with the Web app ( my.athom.com ), screens come from preview Android app. The triggers (when) are based on humidity changes of the bathroom Xiaomi sensor. The conditions (and) use a Homey logic card to compare t…

Thanks, that’s a very interesting approach! I’d really like to see @danone his flows as well, if he’s willing to share. I currently have only a Multisensor 6 laying around…

Long story short, some 6-7 months ago I gave up Homey due to endless z-wave problems. Now I hear all good and in the process of setting Homey back :grinning: I have all the old flows saved as screenshots and once I get home (end of this week), I shall share this particular one here. Thanks for your…

Hi @tlangelaar , would you mind sharing how you’ve hooked up your itho perilex ventilation to Homey?

Automate humidity sensor and fan

Questions & Help

Belpet August 27, 2018, 3:00pm 9

Thanks in advance, @danone!

Someone is in the shower flow

Topic		Replies	Views
HELP for ventilation system flow Flows flow	13	1339	August 22, 2023
Manage humidity in bathroom based on calculated average humidity Flows	19	5896	June 30, 2020
Advanced flow for Vent-Axia Svara extractor fan / Aqara FP300 Questions & Help flow , homey-pro , advancedflow	4	149	January 5, 2026
Aqara temperatuur/vocht sensor in een flow voor ventilatie Vragen & hulp	6	1635	December 6, 2020
Humidity spikes Flows advancedflow	3	161	December 9, 2025

Automate humidity sensor and fan

Related topics