Philips TV (Jointspace) for Homey Control and monitor your Philips TV from Homey: power, volume, Ambilight, apps, sources, channels, the screen itself, and every remote key, all usable in Flows. This is the main support and discussion thread for the app. Post here for help, questions and feedback. For bug reports please use GitHub (link at the bottom), this is where issues are tracked and fixed. Heads up: this is not an official app and is not affiliated with or endorsed by Philips or TP Vision. It works by talking to the TV’s Jointspace API, which the community reverse engineered over the years. Get the app Stable: https://homey.app/a/codes.lucasvdh.philips-jointspace/ Test: https://homey.app/a/codes.lucasvdh.philips-jointspace/test/ The app was completely rewritten as of v3.x. Will it work with my TV? Most Philips TVs from roughly 2014 to 2025 are supported, both Saphi and Android (MSAF) models. The only requirement is that the Jointspace API is reachable on your network. Quick check: open http:// :1925/system in a browser on the same network. If you get a JSON response, you are good to go. If that returns 403 Forbidden, try http:// :1925/1/system and http:// :1925/6/system instead. If either returns JSON your TV is supported; the app probes these version-prefixed paths automatically. What it can do On the device and as Flow conditions (capabilities): Power on/off (uses Wake-on-LAN when the MAC is known) Volume, mute, volume up/down Ambilight on/off, Ambilight mode, Ambilight + Hue Current app and current source (read-only) Screen on/off, independent of TV power (supported models) Every remote key (arrows, digits, colour keys, media transport, home, back, and more) Flow triggers (when): An app was opened / a specific app was opened Ambilight, Ambilight mode and AmbiHue changed Source changed, screen turned on or off (supported models) Flow actions (then): Open an application (autocomplete filled from the TV’s own app list) Open Google Assistant (Android TVs) Select a source, switch to a channel (autocomplete from the TV) Send any remote key Ambilight on/off, Ambilight mode, AmbiHue on/off Turn the screen on or off while audio keeps playing (supported models) Pairing The app discovers TVs automatically over SSDP (older models) and mDNS (Android models). If yours is not found, you can add it by IP address in the pairing wizard. The app remembers your TV by a stable hardware ID, not its IP address. So if your router later hands the TV a different IP, you do not need to re-pair: open the device, use the three-dot menu, choose Repair, and your Flows keep working. Troubleshooting TV will not turn on: in deep sleep some TVs drop off the network entirely and cannot be reached by anything. On models that support it, the recommended approach is to turn the screen off instead of the TV, which keeps the TV reachable. On Android TVs, the Wakelock Revamp app can also keep the network stack alive (at the cost of higher standby power). Device shows unavailable after an IP change: use Repair (see above), do not delete and re-pair, that would lose your Flow references. Incorrect pincode / pairing fails: first confirm the Jointspace API is reachable using the check above. If it is and pairing still fails, please file a bug with a diagnostic report. Reporting a problem The app has a built-in diagnostic report. In the Homey app go to Settings → Apps → Philips TV, pick your TV and tap Generate report. If the TV is not paired yet, use the By IP address tab. Secrets are redacted automatically. Paste the report into a new GitHub issue: Issues / bug reports: https://github.com/lucasvdh/codes.lucasvdh.philips-jointspace/issues Thanks to everyone who has tested, reported issues and contributed over the years. Keep the feedback coming.

Same issue here… Pin shows on TV, I enter pin in app. Hit the send button… wait…wait some more… “Pin incorrect”

Same issue like @Tim_Messerschmidt. My TV 65PUS8601/12

Has anyone managed to get their TV to Wake On Lan using magic packet? I’m having issues with an IR blaster I have and simply can’t get WOL to work - just tried an ethernet cable as figured it might be dropping off WiFi but no response at all

Hello. Are you planning to make this app homey pro 2023 compatible? (SDKv3) That would be great.

@lucasvdh: Could you let us know if you abandoned the app?

[image] [App][Pro] Philips TV update Apps Hi everyone, Just wanted to share an update for anyone that’s wondering if the Philips TV app will work on the new Homey Pro, short answer: it should do soon. I’ve started the process of migrating the app to the new SDK and I’m also looking into some general improvements. More to come soon.

I may have found a solution for the incorrect pin issue during pairing on newer TV’s.

Good news!! @lucasvdh One other question. Using the ambilight on functionality in flows it now automatically selects mode “relaxed”. Does the possibility exist to choose for the mode to select?

I will take a look and let you know.

Thanks, if you provide a link to donate a beer during taking a look… :yum:

[APP][Pro] Philips TV Jointspace

Apps

lucasvdh February 6, 2023, 2:54pm 270

Topic		Replies	Views
[App][Pro] Sony BRAVIA Android TV Apps homey-pro	121	3937	October 30, 2026
[APP][Pro] Samsung SmartTV - Control your Samsung SmartTV Apps app , homey-pro	673	61629	October 23, 2026
[APP][Pro] Android TV - Take control of your TV experience Apps official , homey-pro	104	5738	October 16, 2026
LG WebOS better integration Apps app	544	31262	October 30, 2026
[APP][Pro] Android TV - Community (deprecated) Apps homey-pro , community-app	124	7732	February 18, 2025

[APP][Pro] Philips TV Jointspace

Related topics