# Zigbee issue with Homey Pro 2026 migrated from Homey Pro (Early 2023) using USB Restore **URL:** \ **Category:** Questions & Help\ **Tags:** bugreport\ **Created:** [December 18, 2025, 1:02pm UTC](https://community.homey.app/t/zigbee-issue-with-homey-pro-2026-migrated-from-homey-pro-early-2023-using-usb-restore/147238 "2025-12-18T13:02:30Z")\ **Posts on this page:** 1\ **Showing post:** 10
**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\ **Post date:** [December 20, 2025, 4:00pm UTC](https://community.homey.app/t/zigbee-issue-with-homey-pro-2026-migrated-from-homey-pro-early-2023-using-usb-restore/147238/10 "2025-12-20T16:00:11Z")
I am actually running into similar problems after migrating from my Homey Pro 2023 to a Homey Pro 2026 SE: - Zigbee devices are unresponsive after the migration; - Zigbee devices cannot be repaired (via Maintenance): the device is found but the pairing process ends up in an error saying Homey cannot connect to the device. Also the device remains in pairing mode; - New Zigbee devices cannot be added: same issue as mentioned in the previous point. Ik have tried: - Migrating based on both a local backup as well as a cloud backup; - Switching power adapters (using the HP23’s slightly higher voltage adapter on the HP26); - Re-installing apps; - Re-installing the Homey firmware via the USB tool. All to no avail. The last thing I can think of is to reset the Zigbee network on the HP26. But that will remove all Zigbee devices, which need to be paired/set up from scratch. I have about 70 Zigbee devices. I have reached out to Athom. Hopefully they can help out. In the mean time I switched back to my HP23. --- _[View the full topic](https://community.homey.app/t/zigbee-issue-with-homey-pro-2026-migrated-from-homey-pro-early-2023-using-usb-restore/147238)._