# Zdb5100 **URL:** \ **Category:** Devices\ **Created:** [October 15, 2019, 8:07pm UTC](https://community.homey.app/t/zdb5100/19333 "2019-10-15T20:07:42Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Svenning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/svenning/32/16521_2.png) [@Svenning](https://community.homey.app/u/Svenning)\ **Post date:** [October 15, 2019, 8:07pm UTC](https://community.homey.app/t/zdb5100/19333/1 "2019-10-15T20:07:42Z")
What I need is support for the following device : [ZDB5100](https://youcontrol.dk/z-wave-plus-dansk-fuga-kompertiple-matrix-d-lysdaemper-zdb5100-kan-forudbestilles-1137.html) It’s a Four bottom Dimmer/Switch from Logic Home. I installed the “Logic Home Control” app, but the device zdb5100 is not supported. I would like to contact the group writing the software for the LogicHome devices.? Under the support page “Feature request for Homey” there is a link to a request form but the link seems to be wrong : [https://goo.gl/forms/WyLpQodlV9jtghPk1](https://goo.gl/forms/WyLpQodlV9jtghPk1) can anyone help? ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [October 15, 2019, 8:09pm UTC](https://community.homey.app/t/zdb5100/19333/2 "2019-10-15T20:09:13Z")
@TedTolboom ^^ ---
**Author:** ![Svenning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/svenning/32/16521_2.png) [@Svenning](https://community.homey.app/u/Svenning)\ **Post date:** [October 15, 2019, 8:11pm UTC](https://community.homey.app/t/zdb5100/19333/3 "2019-10-15T20:11:06Z")
Super thanks! ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [October 15, 2019, 11:04pm UTC](https://community.homey.app/t/zdb5100/19333/4 "2019-10-15T23:04:59Z")
@Svenning thanks for asking. At this moment the Logic Home control / Logic Group app is not being further developed by me. Through a Danish friend I learned that Logic Group is no longer further investing into Homey as automation platform. Without access to these devices, it is not possible to add support for them; due to the huge amount of different options embedded in the devices firmware. Please contact Logic Group directly and request for support to further develop this app and add support for these new devices. They know how to contact me. ---
**Author:** ![KennethJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kennethj/32/19919_2.png) [@KennethJ](https://community.homey.app/u/KennethJ)\ **Post date:** [January 2, 2020, 12:34pm UTC](https://community.homey.app/t/zdb5100/19333/5 "2020-01-02T12:34:32Z")
Just dropped Logic Group an email right now. Did you any contact them yourself, @Svenning? ---
**Author:** ![Svenning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/svenning/32/16521_2.png) [@Svenning](https://community.homey.app/u/Svenning)\ **Post date:** [January 2, 2020, 3:29pm UTC](https://community.homey.app/t/zdb5100/19333/6 "2020-01-02T15:29:52Z")
Yes i contacted Them back in oktober and they answered: Hej Svenning Den Logic Home Control app der er tilgængelig, er ikke udviklet af os. Det er Ted Tolboom, som har stået for udviklingen (i tæt kontakt med os). En ønsket udvidelse til denne app, skal aftales direkte med ham. Med venlig hilsen / Best regards **Allan Lytken** Translated is means that any new development must be agreed with Ted… ---
**Author:** ![KennethJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kennethj/32/19919_2.png) [@KennethJ](https://community.homey.app/u/KennethJ)\ **Post date:** [January 2, 2020, 6:28pm UTC](https://community.homey.app/t/zdb5100/19333/7 "2020-01-02T18:28:55Z")
And same reply now: `Hi Kenneth, We are not responsible for the implementation of the Homey driver. We don't have the resources to implement drivers to all Controllers yet. The latest implementation of our ZHC5010 is made by Ted Tolboom. Maybe you can talk to him about implementing Matrix DB in the App to Homey.` @TedTolboom - What’s your view on updating the Homey app? Is it something you could be interested in or isn’t this interesting for you anymore? ---
**Author:** ![TedTolboom](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tedtolboom/32/12081_2.png) [@TedTolboom](https://community.homey.app/u/TedTolboom)\ **Post date:** [January 6, 2020, 7:50pm UTC](https://community.homey.app/t/zdb5100/19333/8 "2020-01-06T19:50:26Z")
> [@Svenning](#): > > Translated is means that any new development must be agreed with Ted… > [@KennethJ](#): > > @TedTolboom - What’s your view on updating the Homey app? Is it something you could be interested in or isn’t this interesting for you anymore? @svenning and @KennethJ thanks for reaching out. The honest answer is that I really like the Logic Group devices from an engineering perspective providing the extensive amount of options, that create almost unlimited options for the end-user. But that also creates the downside for the app developer implementing and debugging all options, and the corresponding driver logic, to ensure the right end-user experience / expectations. Based on the comparable but also different ZHC5002, it will still require me a substantial amount of time (at least 40 hours) of work to build and debug the new driver for the ZDB5100. Not accounting for the other Matrix devices. Considering the private time available, I can’t make a commitment to add support for these devices. ---
**Author:** ![F\_Foldager](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/f_foldager/32/17227_2.png) [@F\_Foldager](https://community.homey.app/u/F_Foldager)\ **Post date:** [March 1, 2020, 8:15pm UTC](https://community.homey.app/t/zdb5100/19333/9 "2020-03-01T20:15:58Z")
Hi! Any news to this topic? Still no support for the ZDB5100? ---
**Author:** ![Svenning](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/svenning/32/16521_2.png) [@Svenning](https://community.homey.app/u/Svenning)\ **Post date:** [March 1, 2020, 9:14pm UTC](https://community.homey.app/t/zdb5100/19333/10 "2020-03-01T21:14:44Z")
Not to my knowledge… ---
**Author:** ![Arturas\_Taskauskas](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arturas_taskauskas/32/17002_2.png) [@Arturas\_Taskauskas](https://community.homey.app/u/Arturas_Taskauskas)\ **Post date:** [May 29, 2020, 12:24pm UTC](https://community.homey.app/t/zdb5100/19333/11 "2020-05-29T12:24:56Z")
Greetings @Svenning, @F_Foldager,@KennethJ ! If still relevant you are welcome to try > **[Logic Group](https://homey.app/da-dk/app/com.logic-group/Logic-Group/)** > > An intelligent home at your fingertips Have a great day ! ---
**Author:** ![MVester](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mvester/32/26410_2.png) [@MVester](https://community.homey.app/u/MVester)\ **Post date:** [June 13, 2020, 9:03am UTC](https://community.homey.app/t/zdb5100/19333/12 "2020-06-13T09:03:05Z")
Looks good @Arturas_Taskauskas, thanks for adding it 🙂 though i don’t have any of the matrix devices, I’m interested in the [Z-Wave Socket Outlet](https://logic-group.com/product/z-wave-socket-outlet/?lang=en) that they have underway, so hoping you will update when time comes 😉 ---
**Author:** ![Nitramevo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nitramevo/32/17475_2.png) [@Nitramevo](https://community.homey.app/u/Nitramevo)\ **Post date:** [September 22, 2020, 7:28pm UTC](https://community.homey.app/t/zdb5100/19333/13 "2020-09-22T19:28:19Z")
⚠ SOLVED ⚠ Moved Homey real close to the new switches. Have to pair directly to Homey to begin with. Required a few PTP, but it worked. ——————— Hi Arturas. I have just bought and installed two ZDB5100 but cannot add them to Homey. When I press the little switch the #1 button flashes but nothing else happens. I thought it was my z wave network and bought two Fibaro plugs to extend the network. They work just fine. I have even put one of the plugs right under the ZDB5100 switch (please see image). What to do? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/d/1d9090b1ee932308c4e1e7a1d36511f1e3098cdd.jpeg) Har I oplevet noget lignende/erfaringer at dele? @MVester @Svenning @KennethJ @F_Foldager ---
**Author:** ![F\_Foldager](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/f_foldager/32/17227_2.png) [@F\_Foldager](https://community.homey.app/u/F_Foldager)\ **Post date:** [September 22, 2020, 8:34pm UTC](https://community.homey.app/t/zdb5100/19333/14 "2020-09-22T20:34:16Z")
Works fine at my house. I have two zdb5100 installed. ---
**Author:** ![Nitramevo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nitramevo/32/17475_2.png) [@Nitramevo](https://community.homey.app/u/Nitramevo)\ **Post date:** [September 22, 2020, 9:33pm UTC](https://community.homey.app/t/zdb5100/19333/15 "2020-09-22T21:33:27Z")
Thx. Got it fixed. What have you done with the switches? I just assigned button 2 for playing a radio channel via Sonos in the bathroom. ---
**Author:** ![KennethJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kennethj/32/19919_2.png) [@KennethJ](https://community.homey.app/u/KennethJ)\ **Post date:** [September 26, 2020, 9:26am UTC](https://community.homey.app/t/zdb5100/19333/16 "2020-09-26T09:26:03Z")
Have the exact same problem: Tried to add my ZDB5100 to Homey but no reaction. Edit: Now I moved the switch within 1 meter of Homey and it worked like a charm. Next step is to set up the buttons and background LEDs. ---
**Author:** ![mcfrede](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mcfrede/32/31985_2.png) [@mcfrede](https://community.homey.app/u/mcfrede)\ **Post date:** [December 3, 2020, 5:37pm UTC](https://community.homey.app/t/zdb5100/19333/17 "2020-12-03T17:37:15Z")
Have you got the full functionality of the switch: single-, double-, triple and long-press for all four buttons? ---
**Author:** ![Nitramevo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nitramevo/32/17475_2.png) [@Nitramevo](https://community.homey.app/u/Nitramevo)\ **Post date:** [December 3, 2020, 6:53pm UTC](https://community.homey.app/t/zdb5100/19333/18 "2020-12-03T18:53:35Z")
Haven’t used triple and long press. But double works just fine. I also use the LEDs to show alerts, eg. Open Windows=red, washing machine started=green, towel heater on=red etc. And buttons to turn on Sonos etc. ---
**Author:** ![mcfrede](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mcfrede/32/31985_2.png) [@mcfrede](https://community.homey.app/u/mcfrede)\ **Post date:** [December 9, 2020, 6:27pm UTC](https://community.homey.app/t/zdb5100/19333/19 "2020-12-09T18:27:35Z")
I got it and got most other functionality to work, but the LED-lights. I can set the RGB values alright, but it does not show on the actual switch. Any suggestions and/or examples will be appreciated since I seem to be stuck. [UPDATE] Think I cracked it, just needed to vent my frustration and get back into “stubborn mode”. I think I will be able to get the LED’s to work now. 🤫 ---
**Author:** ![Nitramevo](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nitramevo/32/17475_2.png) [@Nitramevo](https://community.homey.app/u/Nitramevo)\ **Post date:** [December 10, 2020, 8:40am UTC](https://community.homey.app/t/zdb5100/19333/20 "2020-12-10T08:40:15Z")
Good to know. You should understand that LED lights and activation of each button is two different actions. You should also understand that all changes/amendments should be made in the advanced features of the main switch device and not the individual buttons. Hope it works.