# Zaptec app for Homey? **URL:** \ **Category:** Questions & Help\ **Created:** [January 10, 2023, 5:23pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887 "2023-01-10T17:23:46Z")\ **Posts on this page:** 13\ **Page:** 8
**Author:** ![Bastiaan\_P](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bastiaan_p/32/58997_2.png) [@Bastiaan\_P](https://community.homey.app/u/Bastiaan_P)\ **Post date:** [July 29, 2024, 7:36am UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/142 "2024-07-29T07:36:26Z")
@pwad I still had no opportunity to get some help with creating the dump response. Will follow later ---
**Author:** ![Bastiaan\_P](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bastiaan_p/32/58997_2.png) [@Bastiaan\_P](https://community.homey.app/u/Bastiaan_P)\ **Post date:** [July 29, 2024, 7:40am UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/143 "2024-07-29T07:40:41Z")
@Morten_Aggvin You mean like chargers with some kind of handshake protocol Tesla uses on their SuCs? And in Europe, Fastned implemented this as well. ---
**Author:** ![Soren\_Mogensen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/soren_mogensen/32/106373_2.png) [@Soren\_Mogensen](https://community.homey.app/u/Soren_Mogensen)\ **Post date:** [August 3, 2024, 1:48pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/144 "2024-08-03T13:48:48Z")
I am having problems adding my Zaptec Go in homey. I login with username and password and do not get an error on those, but after a few seconds, I just get no new units found. Have tried to uninstall and install the app, and rebooted homey in between but still no luck. Any advice? ---
**Author:** ![Marius\_Stensrod](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_stensrod/32/56540_2.png) [@Marius\_Stensrod](https://community.homey.app/u/Marius_Stensrod)\ **Post date:** [August 3, 2024, 5:35pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/145 "2024-08-03T17:35:32Z")
> [@Soren\_Mogensen](#): > > Any advice? I will guess if you try to add the charger, get a message that there is no devices found, make a diagnostiv report in the app menu and share the diagnostic report code. Then @pwad will get the information he needs to advice you further. ---
**Author:** ![Marius\_Stensrod](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_stensrod/32/56540_2.png) [@Marius\_Stensrod](https://community.homey.app/u/Marius_Stensrod)\ **Post date:** [August 3, 2024, 5:40pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/146 "2024-08-03T17:40:54Z")
> [@Morten\_Aggvin](#): > > Would it be possible to add flow cards to enable/disable restricted access to the charger? Even though you asked @pwad about this, I took the liberty to check in the API documentation, and there is no such opportunity in the API. You should ask Zaptec to add it to the API first, then it would be possible in theory to add the option if @pwad have the time. ---
**Author:** ![Morten\_Aggvin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/morten_aggvin/32/78910_2.png) [@Morten\_Aggvin](https://community.homey.app/u/Morten_Aggvin)\ **Post date:** [August 9, 2024, 10:07am UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/147 "2024-08-09T10:07:29Z")
Not handshake, but the Zaptec native app has the option to require authentication either with rfid-card or in the app, before it starts charging. ---
**Author:** ![Andre.Mathlener](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre.mathlener/32/85483_2.png) [@Andre.Mathlener](https://community.homey.app/u/Andre.Mathlener)\ **Post date:** [August 11, 2024, 5:34pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/148 "2024-08-11T17:34:54Z")
Can you add the possibility to change the `maxChargePhases` property of the charger? Possible values are `1` and `3`. I tried to make a flow to make the charger only charge with the energy my solar panels produce. But because the minimum value for the charging power is 6A and my charger is connected to three phases, it charges with about 4 KW, which is more than my solar panels produce. I think I can lower this when I can switch the charger to use only one phase. ---
**Author:** ![rh\_rh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rh_rh/32/35144_2.png) [@rh\_rh](https://community.homey.app/u/rh_rh)\ **Post date:** [August 11, 2024, 6:27pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/149 "2024-08-11T18:27:27Z")
zaptec go cannot charge 1phase. therefore the minimum A of charging ist 3x6A. (4140W) ---
**Author:** ![Andre.Mathlener](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andre.mathlener/32/85483_2.png) [@Andre.Mathlener](https://community.homey.app/u/Andre.Mathlener)\ **Post date:** [August 12, 2024, 7:28pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/150 "2024-08-12T19:28:07Z")
Ah, I did not realize that. ---
**Author:** ![Marius\_Stensrod](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marius_stensrod/32/56540_2.png) [@Marius\_Stensrod](https://community.homey.app/u/Marius_Stensrod)\ **Post date:** [August 16, 2024, 6:07pm UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/151 "2024-08-16T18:07:17Z")
3 phase or 1 phase, is determinated when you install the charger. Not a part of the API. ---
**Author:** ![philipostli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/philipostli/32/101837_2.png) [@philipostli](https://community.homey.app/u/philipostli)\ **Post date:** [December 31, 2024, 12:41am UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/153 "2024-12-31T00:41:12Z")
> [@Marius\_Stensrod](#): > > r 1 Actually it is, at least for Pro chargers. Are you able to change the settings in Zaptec portal? We might be able to create a flow card for this, if we are allowed to change it. What about min/max currents? ---
**Author:** ![philipostli](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/philipostli/32/101837_2.png) [@philipostli](https://community.homey.app/u/philipostli)\ **Post date:** [December 31, 2024, 12:42am UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/154 "2024-12-31T00:42:54Z")
We should use the [app tread](https://community.homey.app/t/app-pro-zaptec-charging/118631) for new discussions. [[App][Pro] Zaptec charging](https://community.homey.app/t/app-pro-zaptec-charging/118631) ---
**Author:** ![Andreas\_Kjork](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/andreas_kjork/32/8354_2.png) [@Andreas\_Kjork](https://community.homey.app/u/Andreas_Kjork)\ **Post date:** [May 1, 2025, 11:36am UTC](https://community.homey.app/t/zaptec-app-for-homey/74887/155 "2025-05-01T11:36:14Z")
Zaptec app via hacs to HA. There is possible to remove tex Tibber from controlling the charger. It would be great if that would work with homey to. [Previous page](https://community.homey.app/t/zaptec-app-for-homey/74887.md?page=7)