# Z-wave & hardware Region

**URL:** <https://community.homey.app/t/z-wave-hardware-region/91997>\
**Category:** Questions & Help\
**Tags:** homey-pro\
**Created:** [October 16, 2023, 7:19pm UTC](https://community.homey.app/t/z-wave-hardware-region/91997 "2023-10-16T19:19:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![John\_Cusano](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/john_cusano/32/18722_2.png) [@John\_Cusano](https://community.homey.app/u/John_Cusano)\
**Post date:** [October 16, 2023, 7:19pm UTC](https://community.homey.app/t/z-wave-hardware-region/91997/1 "2023-10-16T19:19:00Z")

</div>

I have not been able to add my Fibaro motion sensor to my Homey Pro. I have tried re-adding the app, excluding the Fibaro, and re-adding it, but nothing works. I pulled out my former Homey and it added the Fibaro without an issue. I then noticed that my Homey is set for the hardware region of the US, and my Homey Pro is set for Europe. I cannot change it in either the Homey iPad app, or the web version. In the web version, the z-wave setting isn’t even available under the settings.

Any thoughts would be appreciated.

---

<div class="post-metadata">

**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\
**Post date:** [October 16, 2023, 7:40pm UTC](https://community.homey.app/t/z-wave-hardware-region/91997/2 "2023-10-16T19:40:05Z")

</div>

Setup Homey Pro

- Set the Location in the Homey Mobile App , restart and Check,

- Maybe even set it to far outside your Regio (fe to Europe), and move it back to your actual location (Regio US)  
(https ://my[.]homey[.]app/[homeys/deaf0001bad1234567890]/settings/system/location)

- Restart Homey or Pull The Plug

Check back at [Homey Developer Tools](https://tools.developer.homey.app/tools/zwave) the Zwave Regio if it is Fixed.

or Contact Athom support

---

<div class="post-metadata">

**Author:** ![John\_Cusano](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/john_cusano/32/18722_2.png) [@John\_Cusano](https://community.homey.app/u/John_Cusano)\
**Post date:** [October 16, 2023, 7:51pm UTC](https://community.homey.app/t/z-wave-hardware-region/91997/3 "2023-10-16T19:51:54Z")

</div>

Thank you. I didn’t even know about the developer tools, so this is very helpful. I’ll try adjusting the settings here then contact Athom if needed.