# Yamaha receiver **URL:** \ **Category:** Apps\ **Created:** [December 26, 2018, 1:05am UTC](https://community.homey.app/t/yamaha-receiver/5904 "2018-12-26T01:05:29Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![dennisje00](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dennisje00/32/9423_2.png) [@dennisje00](https://community.homey.app/u/dennisje00)\ **Post date:** [December 26, 2018, 1:05am UTC](https://community.homey.app/t/yamaha-receiver/5904/1 "2018-12-26T01:05:29Z")
hello, the yamaha receiver app is not working again… ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [December 26, 2018, 7:52am UTC](https://community.homey.app/t/yamaha-receiver/5904/2 "2018-12-26T07:52:30Z")
A bit more info would be nice. Which version of the Yamaha app are u running? Which firmware version of Homey are u running? Did u upgrade from 1.5.13 to 2.0 and then the app stopped working? Did u try to add the Yamaha app while u was on 2.0? ---
**Author:** ![dennisje00](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dennisje00/32/9423_2.png) [@dennisje00](https://community.homey.app/u/dennisje00)\ **Post date:** [December 26, 2018, 12:18pm UTC](https://community.homey.app/t/yamaha-receiver/5904/3 "2018-12-26T12:18:52Z")
I have the recent version, i cant even update to 2.0 ---
**Author:** ![Davy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/davy/32/12519_2.png) [@Davy](https://community.homey.app/u/Davy)\ **Post date:** [December 26, 2018, 1:05pm UTC](https://community.homey.app/t/yamaha-receiver/5904/4 "2018-12-26T13:05:20Z")
If you need help and someone is kindly enough to assist you. Then it would be nice if you give clear answers to all 4 questions, to provide enough information for any troubleshooting… ---
**Author:** ![Skebokungen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/skebokungen/32/12972_2.png) [@Skebokungen](https://community.homey.app/u/Skebokungen)\ **Post date:** [December 27, 2018, 12:21pm UTC](https://community.homey.app/t/yamaha-receiver/5904/5 "2018-12-27T12:21:15Z")
I have tried both apps non of them kan be installed from appstore. ---
**Author:** ![Skebokungen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/skebokungen/32/12972_2.png) [@Skebokungen](https://community.homey.app/u/Skebokungen)\ **Post date:** [December 27, 2018, 12:21pm UTC](https://community.homey.app/t/yamaha-receiver/5904/6 "2018-12-27T12:21:52Z")
I run 2.0.0rc9 ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [December 27, 2018, 3:23pm UTC](https://community.homey.app/t/yamaha-receiver/5904/7 "2018-12-27T15:23:28Z")
That would be correct. The app has “version”: “0.3.0”, “compatibility”: “0.x || 1.x”, So cannot be installed via the appstore on 2.0. ---
**Author:** ![Skebokungen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/skebokungen/32/12972_2.png) [@Skebokungen](https://community.homey.app/u/Skebokungen)\ **Post date:** [December 27, 2018, 3:24pm UTC](https://community.homey.app/t/yamaha-receiver/5904/8 "2018-12-27T15:24:17Z")
Possible to install at all? ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [December 27, 2018, 3:27pm UTC](https://community.homey.app/t/yamaha-receiver/5904/9 "2018-12-27T15:27:30Z")
Can be installed when changing the compatibility line and then install via CLI. Dunno if the app will work tho, not using it myself. [Here is the beta branche](https://github.com/kruimel0/yamaha-app-homey/tree/beta). ---
**Author:** ![Davy](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/davy/32/12519_2.png) [@Davy](https://community.homey.app/u/Davy)\ **Post date:** [December 28, 2018, 8:38am UTC](https://community.homey.app/t/yamaha-receiver/5904/10 "2018-12-28T08:38:40Z")
I’m using the Yamaha app(beta) since Homey 1.5 and upgraded a while ago to Homey 2.0-rcX. The Yamaha app is still working without any problems for me. ---
**Author:** ![Skebokungen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/skebokungen/32/12972_2.png) [@Skebokungen](https://community.homey.app/u/Skebokungen)\ **Post date:** [December 28, 2018, 11:52am UTC](https://community.homey.app/t/yamaha-receiver/5904/11 "2018-12-28T11:52:08Z")
I had to reset my homey when i upgraded to 2.0 and after that it is not possible to install from appstore, so i will try to install it from Github / CLI ---
**Author:** ![NCL](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ncl/32/9159_2.png) [@NCL](https://community.homey.app/u/NCL)\ **Post date:** [April 17, 2019, 5:59pm UTC](https://community.homey.app/t/yamaha-receiver/5904/12 "2019-04-17T17:59:09Z")
How about linking receivers. Could that be added in the future? ---
**Author:** ![Driesk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/driesk/32/10666_2.png) [@Driesk](https://community.homey.app/u/Driesk)\ **Post date:** [October 8, 2019, 5:56pm UTC](https://community.homey.app/t/yamaha-receiver/5904/13 "2019-10-08T17:56:00Z")
I do have a problem with the app: receiver yamaha htr-4069 (rx-v481) settings: correct ip zone: Main\_Zone It is possible to control the receiver via the tile in the app or via (then) flowcards. But flows will not react when the receiver is turned on or off. The tile in the app is not updated with the current power state of the receiver. Are there more people with the same problem? Also nice to know if it does work for you. Issue is already reported at github. ---
**Author:** ![lucasvdh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lucasvdh/32/54915_2.png) [@lucasvdh](https://community.homey.app/u/lucasvdh)\ **Post date:** [October 11, 2019, 10:29am UTC](https://community.homey.app/t/yamaha-receiver/5904/14 "2019-10-11T10:29:48Z")
I’ve got the Yamaha HTR-4067. The app has always worked flawlessly when sending commands to it but the process monitoring the status of the device has never worked for me. Luckily I don’t really need the on/off status as a trigger in any flows. I’ve had a look at the app before and know a possible solution but havent had the time to create a PR. The issue is that the monitor loop is broken at some point. ---
**Author:** ![lucasvdh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lucasvdh/32/54915_2.png) [@lucasvdh](https://community.homey.app/u/lucasvdh)\ **Post date:** [October 24, 2019, 8:17am UTC](https://community.homey.app/t/yamaha-receiver/5904/15 "2019-10-24T08:17:05Z")
I’ve started on a complete rewrite of the Yamaha app and it’s coming along quite nicely. No more crashes, added some nicer logos and the device in Homey is finally kept up to date with the actual amplifier. So hopefully there’ll be an update soon 🤞 The thing is that I don’t have a Yamaha MusicCast device to test the other driver that is in the app. Can anyone that does have one help me out by testing it? Send me a DM if you’re up for it. ---
**Author:** ![Driesk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/driesk/32/10666_2.png) [@Driesk](https://community.homey.app/u/Driesk)\ **Post date:** [October 24, 2019, 7:38pm UTC](https://community.homey.app/t/yamaha-receiver/5904/16 "2019-10-24T19:38:55Z")
Very good news. If I can be of any help, let me know. But that would be my first cli install 😅. Unfortunately no music cast ---
**Author:** ![Driesk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/driesk/32/10666_2.png) [@Driesk](https://community.homey.app/u/Driesk)\ **Post date:** [October 31, 2019, 7:52pm UTC](https://community.homey.app/t/yamaha-receiver/5904/17 "2019-10-31T19:52:36Z")
CLI install worked fine. First impression of your app is very good! 👍 All problems with the previous app seem to be solved. Small problem Adaptive DRC button does not to work. I can totally live with that for an alpha version 👏 ---
**Author:** ![ktd](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ktd/32/11761_2.png) [@ktd](https://community.homey.app/u/ktd)\ **Post date:** [October 31, 2019, 10:54pm UTC](https://community.homey.app/t/yamaha-receiver/5904/18 "2019-10-31T22:54:52Z")
That sounds promising. Looking forward to a release in the app store. ---
**Author:** ![lucasvdh](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/lucasvdh/32/54915_2.png) [@lucasvdh](https://community.homey.app/u/lucasvdh)\ **Post date:** [October 31, 2019, 11:37pm UTC](https://community.homey.app/t/yamaha-receiver/5904/19 "2019-10-31T23:37:03Z")
Nice, good to hear. I’ll try and have a look at Adaptive DRC this weekend. I’m also in contact with Koen Martens (the creator of the original Yamaha app) to transfer ownership of the app to me so I can publish a new alpha and beta version so people won’t have to switch apps. So hopefully we can start a new alpha test round soon. ---
**Author:** ![Axel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/axel/32/16597_2.png) [@Axel](https://community.homey.app/u/Axel)\ **Post date:** [November 1, 2019, 12:20am UTC](https://community.homey.app/t/yamaha-receiver/5904/20 "2019-11-01T00:20:48Z")
I installed it just fine after the 3.0 firmware upgrade. I can do some more testing on the receiver part, as I have a Yamaha receiver as well. Do you plan on supporting discovery and removing the dependency on static IPs as well? Thanks for the work so far 🙂 [Next page](https://community.homey.app/t/yamaha-receiver/5904.md?page=2)