# Water level - any solution supported by Homey **URL:** \ **Category:** Questions & Help\ **Created:** [April 19, 2020, 9:42am UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644 "2020-04-19T09:42:02Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [April 19, 2020, 9:42am UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/1 "2020-04-19T09:42:02Z")
Hi, haven’t found much on this, but is there any chance to integrate some solution with Homey to get water level measurement system ? Eg. [https://en.robbshop.nl/water-level-meter-aquaplumb-vegatronix](https://en.robbshop.nl/water-level-meter-aquaplumb-vegatronix) in combination with Fibaro Smart Implant ? Any other solutions are available ? Best would be however battery operated Z-Wave solutions for me. Thank you. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [April 19, 2020, 9:44am UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/2 "2020-04-19T09:44:42Z")
Btw, [https://vegetronix.com/Products/AquaPlumb/](https://vegetronix.com/Products/AquaPlumb/) looks really interesting but it’s anyway out of stock. ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [April 19, 2020, 10:23am UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/3 "2020-04-19T10:23:14Z")
You could use a door sensor. Here are some pictures (only german): [Z-Wave Binärschalter selbst bauen](https://community.homey.app/t/z-wave-binarschalter-selbst-bauen/19516) You can solder wires at the magnetic sensor and these wires can be positioned at your max. water level. If the water reches the wires, the sensor will alert Homey and you can do some stuff with flows. It’s possible to ues Fibaro (Z-Wave) or Aqara (Zigbee) sensors. The Aqara sensor offers a device option to invert the alarm signal. Then you get an alert if the water connects the two wires. This way I built a rain sensor (Aqara door sensor and the rain sensor circuit board). Pictures for it: [Suche Regensensor und Warnung erstellen, wenn Fenster noch offen](https://community.homey.app/t/suche-regensensor-und-warnung-erstellen-wenn-fenster-noch-offen/17012) ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [April 19, 2020, 12:18pm UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/4 "2020-04-19T12:18:03Z")
I forgot the Fibaro watersensor. You can add wires to place the sensor outside ald the end of the wires at water level. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [April 19, 2020, 1:03pm UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/5 "2020-04-19T13:03:18Z")
Thank you, however if I understood your proposal well, this is rather for full/empty kind of monitoring, while I’m searching for scale type of monitoring (0-100%) ---
**Author:** ![RonnyW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ronnyw/32/10879_2.png) [@RonnyW](https://community.homey.app/u/RonnyW)\ **Post date:** [April 19, 2020, 2:09pm UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/6 "2020-04-19T14:09:59Z")
Ah, ok. Then some sensors on several levels and some logic 😁 ---
**Author:** ![Dirk\_Buekenhoudt](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirk_buekenhoudt/32/4116_2.png) [@Dirk\_Buekenhoudt](https://community.homey.app/u/Dirk_Buekenhoudt)\ **Post date:** [March 2, 2021, 2:23pm UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/7 "2021-03-02T14:23:06Z")
Any other solution meanwhile to be used to measure water level in water tank (10000l). For me best on fir it with long battery operations. ---
**Author:** ![Sharkys](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sharkys/32/54029_2.png) [@Sharkys](https://community.homey.app/u/Sharkys)\ **Post date:** [August 25, 2023, 7:50am UTC](https://community.homey.app/t/water-level-any-solution-supported-by-homey/28644/8 "2023-08-25T07:50:52Z")
> [@\[APP\]\[Pro\] Tank Level Meter TF-FT002](https://community.homey.app/t/app-pro-tank-level-meter-tf-ft002/44174): > > For my apps I receive occasional donations. I thought I would give it a good use. Well, according to my wife it is an absolutely senseless investment. But hey, it was only 30 euro, and I had never created a 433MHz app before. So here we go. I bought this device to be able to see how full my rain barrel is. Since Homey’s 433 range is terrible, I do hope that Homey can receive the signal. The barrel is only 8m outside the wall where my Homey is placed. Edit: I just installed it on …