# Warema Awning / Sunblind - how to control it

**URL:** <https://community.homey.app/t/warema-awning-sunblind-how-to-control-it/161594>\
**Category:** Devices\
**Tags:** homey-pro\
**Created:** [October 31, 2026, 4:37pm UTC](https://community.homey.app/t/warema-awning-sunblind-how-to-control-it/161594 "2026-10-31T16:37:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sunny\_Carver](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunny_carver/32/121053_2.png) [@Sunny\_Carver](https://community.homey.app/u/Sunny_Carver)\
**Post date:** [October 31, 2026, 4:37pm UTC](https://community.homey.app/t/warema-awning-sunblind-how-to-control-it/161594/1 "2026-10-31T16:37:08Z")

</div>

Hi Homey customers,

I have Warema Awning with Warema WMS radio system, basically a wi-fi remote to control the extension of Warema Awning.  
I looked at Community because I wanna integrate it in Homey Pro.

Many of threads are in German and in addition there are no similar use cases (control the awning/sunblind). Anyway, after a while I found how to do it using Homey Pro flow.

Here you are.

First you need a simple “switch” from VirtualDevice (WHEN) to open and close it

As THEN you can use Logic from Homey Pro, more specifically a Make a POST request, as follows:

Make a POST request to

http://IP\_LOCAL\_ADDRESS\_OF\_YOUR\_WMS\_WIFI\_DEVICE/commonCommand

with headers

Content-Type: application/json

and body

{“protocolVersion”: “1.0.0”, “command”: “action”, “source”: 2, “responseType”: 0, “actions”: [{“destinationId”: ID\_NUMBER\_OF\_YOUR\_SUNBLIND, “actionId”: 0, “parameters”: {“percentage”:100}}]}

Basically when percentage is equal to 100 is open, when equal to 0 is closed and you can even use a parameter to do that.

By the way if you have a light embedded in the sunblind the logic is the same, just you need to change the ID number of the light instead of the sunblind.

Hopefully this helps.

Sunny